Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Home / Home Services / Carpentry / How to Add Shelves to a Closet?
Q.

How to Add Shelves to a Closet?

view 19Views

7 days

Comment

1 Answers

Send

Recently, I bought a new house and in the bedroom, there was a small closet which didn’t have shelves in it. So, I planned to take it up as a DIY project and add some shelves to the closet. Since I didn’t know how to add shelves to a closet, I started searching for how to do it. I learned that to add shelves to a closet; you need to measure the closet first and plan how many shelves you want to add. 

How Do I Add Shelves to My Closet?

After the planning process, you need to purchase a board and start cutting the board according to the measurements that you have taken. You can use a table saw or circular saw to cut the board. Here are the rest of the steps that you need to follow. 

  • First, cut all the standalone shelves. The length and width of these shelves should be a little smaller than the size of the closet. 

  • After that, build the support shelves. These shelves should be around 2 inches in height and would go on the walls of the closet. 

  • Use a pencil to mark the area where you want to place the shelves. 

  • Attach the support shelves to the wall of the closet using 3-inch long screws.

  • After that, stain the shelves using water-based stain and leave it dry. 

  • When the shelves have completely dried, install them. 

After going through the process, I understood I can’t do it on my own. So, I finally hired a carpenter for that. And that is how you can add shelves to a wardrobe. I hope this helps. 

Hire Professional Carpenters from NoBroker to Add Shelves to Your Closet Read More

How to Build a Minimalist Wardrobe?

Most Viewed Questions

Recently Published Questions

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners