How to Apply Plastic paint on walls?

Hello Oshin, I wanted to apply plastic paint over my interior wall. As this was a DIY thing I was doing along with my friend, I looked up how to apply plastic paint on walls. I used the emulsion plastic paint for this purpose and the process wasn’t too complicated for us to get the job done. Let me share the process with you below.

How to Use Plastic Paint on Wall?

The preparation process for old and new surfaces is different. Mine was an old surface with paint. So, I am sharing the preparation steps accordingly. Here is the method you can follow:

1. If the existing paint on the wall is in good condition and firm, use sandpaper first.

2. Wash the surface with lime water and use a clean cloth to pat it dry. 

3. Remove any loose and peeling paint with a paint scraper. 

4. Wash the surface with soap and water solution. Let it dry.

5. If the old paint is blistered, remove it using a patent paint remover.

6. For the patches on the wall, use wall putty and a putty knife to seal them. Smoothen the surface and make it even while you do so.

7. Apply a single coat of primer and let it dry completely.

8. Now, apply the plastic emulsion paint using a brush, spray or a roller.

9. Let each coat dry before applying the next one. Ideally, 2-3 coats should be enough.

10. Let the surface dry completely.

This is all about the process.

Hi, 

Walls tend to get dirty over time and also when you have kids at home. Unfortunately, only walls that have plastic paint on them can be cleaned. I have kids at home, and the walls are like their drawing board. But luckily, the walls are painted with plastic paint; thus, we can clean them very easily. So, how to do plastic paint on wall? 

The steps are very simple, and I have provided some steps following which you should be able to do on your own. 

How To Use Plastic Paint On Wall?

• Clean the surface using sandpaper before applying the primer.

• Apply the primer and let it dry for 24 hrs.  

• After that, mix the necessary amount of water in the paint and apply it with a brush, spray, or roller. 

• The water in the paint will evaporate as it gets applied to the surface. 

• While applying the paint make sure to apply uniform brush strokes. 

And that is how to do plastic paint on wall. 

Benefits of Plastic Paints

• These paints have a higher percentage of plastic in them, thus making it easier to clean them. 

• Plastic paints provide a matte finish to the walls thus making them appear magnificent and tileless. 

• These are highly affordable and durable. They can endure for many years. 

• It can also be used to paint wooden panels, thus providing them with an excellent finish.

• Since it is oil-based, it is highly waterproof and more durable than distemper paints.

I hope this helps!

Get Your Walls Painted By Experts Through NoBroker

Water-based wall paint is called plastic emulsion paint. You can rely on me to get ana answer to your question ‘how to apply plastic paint on walls?’ because I got my home painted with plastic paint just last week. Plastic paint gives the walls a smooth, matte finish and is based on acrylic. Similar to premium emulsions, these paints are also washable and simple to maintain. Although it is extremely long-lasting, it should not be applied to wood, iron, or other exterior surfaces.  

How to paint plastic paint on wall?

The Indian standard should indicate that the specification is IS: 5411 of the endorsed brand and producer. Any stable plastic paint emulsion in water should serve as the medium for the material, which should consist of pigments with appropriate extenders.

Raw Materials for Plastic Paint

• Cement Primer: A layer of concrete preliminary is a base coat applied on a superficial level for painting.

• Putty: It is used to fill holes and uneven surfaces. It is made by combining varnish and white lead chalk "MITTI" to form a thick paste.

Preparation of New Surface

• The surface must be entirely cleaned of mortar dropping, sprinkles of concrete slurry, dust, and so forth.

• A primer coat is applied on a superficial level.

• At least 48 hours should be allowed for the surface to dry.

• To achieve a smooth and even surface, sandpaper should be used to rub the surface. Any unevenness is to be evened out by applying putty.

Preparation of Old Surface

• Sandpaper should be used to sand down old paint that is solid and firm.

• Lime water should be used to clean all stains caused by smoke and grease.

• Clean up all loose paint and dust completely.

• The surface must be washed with cleanser and water.

• Patent paint remover should be used to remove blistered old paint.

• Putty should be used to fill in the old surface patches to make the surface smooth and even.

• The same method as for new work is used to apply plastic emulsion paint after the old surface has been prepared.

How to apply plastic paint on walls?

• Typically, the paint is applied with a brush, spray, or roller.

• The water in the paint evaporates as it dries. The film hardens as soon as the water evaporates, allowing the subsequent coat to be applied.

• Plastic paints are thinned with water rather than turpentine.

• For an undercoat that is applied to an absorbent surface, it is necessary to thin it with water. 

• The surface that will be finished should have a smooth finish.

Now you know h

ow to apply plastic paint on walls.