How to assemble office chair?

1. Unpack all items and lay them out, as you can see there isn’t much to it.
2. Take the casters and push them into the 5-star base
3. Place gas strut cover over gas strut
4. Place the gas strut into a 5-star base, it has a tapered fit - So itwill become tighter once the chair is sat on.
5. Fit the chair back onto a mechanism, it just slides in as shown below. The image below shows the chair back being held upside down to make it easier to slide onto the main chair mech (Mechanism). Bolt it together using the bolts supplied (Only 3 are needed in the example shown below)
6. Now place the main chair mechanism (with the chair back attached) onto the underside of the seat, aligning the 4 bolt holes in the underside of the seat. Then bolt the mech onto the seat as shown below.
7. Slide the small paddle handles onto the silver levers sticking out of either side of the chair mech (You can see the silver paddle levers above)
8. Attach armrests to the underside of the chair, just slide them into the side and then turn the hand screw to tighten them up.
9. Place the chair onto the gas strut &5-star base securely.
10. Lastly, attach the headrest, and you're done.

When the work from the home regime started, I had to get an office chair for myself to work comfortably. Having a good office chair ensures that you have proper concentration and don’t suffer from backache. Assembling the office chair is not hard, let me tell you how to assemble office chair:

First, unbox every screw and unwrap every part that you receive in the package. This will help you assemble the chair easily and you won’t scramble for the pieces while you’re at work.

For this, you will have to push the caster wheel in the base. In some cases, the wheels may require you to tighten the bolts, and it’s very easy so you won’t have any trouble doing it.

You are required to attach the gas strut. For this, put the gas strut cover over the gas strut. You can also keep the gas strut into the five-star base in the next step.

For attaching the gas strut to the base, you are required to align it with the base and press it. This will become tight once you sit on the chair.

Next, fit the chair together. You are required to attach the backrest, headrest, armrest,  and seat. You can attach them and bolt them together depending on the mechanism.

It’s time to finish assembling the chair. For this, you are required to align the upper part of the chair with the main chassis and the gas strut. Exert the pressure and be done!

I hope now you know how to assemble a office chair easily.

Read more:

I hope you like my tips on how to assemble office chair.