How to Clean Drain Pipes?

Hello Sania, a few weeks ago, I had the same query, how to clean drain pipes. Hence, I researched about it and found that drainage pipes can be easily cleaned using a plunger, which does a pretty good job. Using it correctly helps in cleaning the drain pipe and clearing its pathway pretty well. You must start by closing the sink drain and filling up the sink halfway up with water. I will describe the detailed version below.

How to Unclog a Drain Pipe?

1. The idea here is to create a suction so as to push out the obstacles from the pipe. For this, fill up your sink around halfway.

2. Dip the plunger into the sink such that it submerges in the water. Press the plunger down on the bottom of your sink to get rid of the air inside it. 

3. Push the plunger up and down by using the straight handle. The seal will push the water down instead of air. 

4. Keep a towel to clean and water that spills in the process. 

5. Conclude by cleaning the drainpipe by pouring hot water. You can also open the faucet if it has hot water. 

This is how to unblock a drain pipe. I hope these steps will help.

My drain was completely blocked by the time I realised I should focus on cleaning my sewer and drainage system. So, I started looking for ways how to clear a blocked drain pipe. I have found the most practical way to unclog drains and it has worked magically for me every time. 

How to Unclog a Drain Pipe?

Any build-up obstructing your waste pipe will be released by the baking soda and hot water. The vinegar's chemical reaction will force the sludge to flow down the drain. Let me explain more to you about how to clean drainage pipe at home.

• First, fill your drain with a pan or bowl of hot water.

• Following this, flush the drain with 1/2 cup of baking soda and let it sit for 5 minutes.

• After that, mix one cup of vinegar with one cup of extremely hot water. Give it ten minutes to settle.

• To remove the scum that the baking soda and vinegar have loosened, pour one more pot of boiling water down the drain.

• Get liquid cleansers to clear the clog in your pipes. These pharmacological fixes frequently work wonders.

• You will need to let the chemical solution sit for a bit, but before you take a bath or shower, make sure you rinse it off with hot water.

• Because powder-based cleansers are less corrosive to pipes than liquid ones, some people choose to use them.

• The chemical sodium hydroxide, which is present in the majority of these powders, unclogs and drains swiftly. The remedy doesn't need to remain in the clogged drain for extended periods of time in order to be effective because of how rapidly it works.

So, this is how to clean home drain pipes using just a few commonly found household items. I hope it helps you.

To avoid obstructions and maintain good drainage, bathroom drain pipes must be cleaned regularly. To know how to clean drainage pipe, you should follow these simple steps:

• Rubber Gloves

• Plunger

• Drain Snake

• Baking Soda and Vinegar

• Boiling Water

How to Clean Drain Pipes in Bathroom?

• Remove Visible Debris:

Clean the drain cover or stopper of any obvious debris including hair, soap scum, and dirt.

• Plunge the Drain: 

Use a plunger for minor obstructions. It should be placed over the drain, sealed, and slowly plunged up and down. This can remove obstacles.

• Baking Soda and Vinegar: 

Pour a mixture of baking soda and vinegar (about 1/2 cup each) down the drain to clean it. Give it 15 to 30 minutes to sit. To remove the loosening material, follow with boiling water.

• Use a Drain Snake: 

If the obstruction continues, place a drain snake into the pipe and twist it to trap the obstruction. Remove it, and then run boiling water over it to clean it.

• Regular Maintenance: 

Use a hair strainer in the drain and apply the baking soda and vinegar solution once a month to avoid recurring clogs.

• Professional Assistance:

You might want to consider calling a professional plumber if these efforts fail or if you're dealing with a serious blockage.

Maintaining your bathroom drain pipes regularly and taking preventative measures can help keep them clear and free-flowing, avoiding expensive and annoying obstructions. I hope this helps you with how to clean a drain pipe.

Read More:

Because you can't get inside the pipe to clean it manually, cleaning drain pipes might be challenging. However, there are several methods for flushing your drain to remove clogs or foul odours. In this answer I will let you know how to clean drain pipes? 

you can use soap and water, vinegar and baking soda, or store-bought drain cleaners. You can keep your kitchen and bathroom drain pipes clean by using the appropriate techniques.

• Getting Rid of Grease Buildup

1. Bring two litres of water to a boil over high heat.

2. Dishwashing detergent should be added to the water. As the water comes to a boil, add three teaspoons of dishwashing detergent. After that, turn off the stovetop heat and carefully lift the pot of water to your drain. 

3. 3

   . Pour the water down the drain two times. To drain the water, carefully tip the pot or kettle down the drain. Allow four to five minutes for the water to cool before pouring it down the drain if you have plastic pipes.

4. Using hot water from the faucet, flush the drain. After the hot water has drained, put on the maximum heat setting on your faucet. If the drain is clogged or slow, you may need to repeat the operation to clear it and remove larger grease obstacles.

• Using standard drain cleaners

1. Purchase a drain cleaner in a store or on the internet. Traditional cleaners, foaming cleaners, and enzyme cleaners are all options. Traditional and foamy cleansers may include dangerous chemicals, whereas enzyme cleansers are composed entirely of natural components.

2. Read the package's instructions carefully. Because every drain cleaner is different, it's critical to read the instructions to figure out how long you should let it sit before flushing it. 

• Warm water rather than hot water is preferable for enzyme cleaners.

• If you mix two different types of chemical drain cleaners, hazardous gases will result.

1. Down the drain, pour the drain cleaner. Pour the recommended amount of drain cleaner into the sink, following the manufacturer's instructions. You'll observe the solution settle near the top of your drain pipe if it's clogged.

2. 4

   . Using hot or boiling water, flush the drain. You'll need to flush the rest of the drain cleaner down the drain with warm or hot water after letting it sit in the drain for a while.

• To get the best results, follow the guidelines on the package.

Hence do follow these steps of how to clean drain pipes? Also let us know whether it worked for you or not

Read More: