How to Clean Elica Chimney?

Hi. I have an Elica chimney installed in my kitchen. We use it heavily for different purposes and thus, understand the importance of cleaning the machine regularly. I clean the filters while my wife takes up the job of cleaning the exteriors. So, let me show you how to auto clean Elica chimney with and without filters.

How to clean Elica filterless chimney?

As you might have guessed from the name, filter-less chimneys are the ones without a filter. This helps eliminate the maintenance cost due to no need to clean and change the filter. Like the other chimneys in the market, Elica provides the auto clean button on its chimneys. After pressing the button, the waste oil gets collected in the oil collector. The whole process will get done in around 10-15 minutes. 

How to clean Elica chimney at home?

1. Begin by removing the filters of your chimney. You may need to unscrew with a screwdriver at a few places, depending on your chimney’s model. 

2. Add mild dish soap to a large tub of hot water. You can alternatively use baking soda as a cleaning agent as well. Now, soak your chimney’s filters by immersing them into the tub. Keep it as it is for at least 15-2- minutes. 

3. Use a soft brush or sponge to gently scrub the filters. Be careful around the mesh screen and fins of the filters to avoid damage. 

4. Lastly, rinse them with water and let them dry on their own without using any external heating appliances. Do not expose them to direct sunlight as well. Just place them in a ventilated room. 

You can go through Amit’s answer to understand how to clean Elica auto clean chimney. 

I hope you now understand the complete procedure.

A few months back, I bought an Elica chimney and have been using it since. Recently I noticed that the exterior of the chimney has become a bit dirty and decided to clean it. I decided to read the manual before cleaning, and in that, I was able to spot the Auto-cleaning mode. I decided to use that to clean the chimney. Here is how to clean Elica chimney at home. 

How to Clean Chimney Elica at Home?

As I mentioned before, I used the auto-cleaning method to clean the chimney. Here is how you do it.

• Turn on your Elica Chimney.

• Next, press the Auto-Clean button. 

• A 10-minute timer will be present near it. Wait for that to come down to zero. 

• After that, you can turn off the chimney and slowly remove the tray, where all the oil inside the chimney gets collected. 

• Now, you can just clean the tray with a dishwashing solution and attach it back up. 

And that’s how to clean the Elica chimney. From my cleaning experience, I would say it's a big hassle to clean yourself as you have to clean the inside of the chimney even after the auto-cleanup process. 

I would recommend you to go for a professional cleaning service such as

, etc. 

I wanted to clean my chimney filter. It's critical to maintain a clean kitchen chimney to guarantee its effective operation and to keep smoke, dirt, and odours out of the air in the kitchen. As. I was wondering how to clean Elica chimney filter, I got hold of Amit’s answer.

How to Use Auto Clean in Elica Chimney?

Previously, I wasn’t sure of Elica chimney auto clean how to use. All thanks, to Mr. Amit for sharing the steps for the same. I can share the steps that I followed for auto cleaning my Elica chimney.

• I looked for the auto-clean button on the control panel to enable automatic cleaning of the chimney.

• As I hit the button, the chimney cleaning was done by itself and took around 10 mins. 

• There were oil contaminants on the oil collector.

• Finally, I took out the oil collector after 20 minutes and disposed the oil that was deposited. I also cleaned the oil collector for further use.

These are the steps for Elica chimney how to clean at home.

I hope this helps!

Read More:

It takes a lot of work and effort to clean your kitchen chimney. The majority of our Indian cuisine uses a lot of oil and ingredients, which produces a lot of smoke. The effectiveness of the chimney may be reduced if grease or oil from the smoke gets lodged between the filtering. So you must know how to clean chimney Elica.

What is the Elica chimney auto clean procedure?

You can follow the procedure mentioned by Amit to auto-clean the chimney. Because whenever I am in need of cleaning the chimney, I go through his answer.

What is the process for Elica chimney cleaning at home?

1) Caustic Soda

You can remove the kitchen chimney grease easily with hot water and caustic soda. Disconnect the chimney filters and set them on a plate. Pick up a small container and fill it with hot, boiling water. As soon as you do this, odours will begin to develop. Allow it to remain undisturbed for a minimum of two to three hours.

2) Vinegar

You can use a sponge or tissue dipped in the vinegar solution to quickly clean the kitchen's coatings. Prepare a small container with hot, boiling water, add one to two cups of vinegar, and stir to completely clean the filters. Chimney filters should now be submerged in this solution and left for a minimum of two hours. Filters should be taken out and scrubbed using a cleaner and let dry for some time.

You can now clean your chimney with this guide about how to clean chimney Elica.

With the evolving technology, you can easily clean your chimney at home. There are chimneys that can automatically clean themselves with a few taps on the button. I have an Elica chimney inside my home and I am very happy with this chimney. I don't need to spend much time cleaning this chimney. Let me share with you how to clean Elica chimney so that you can also decide to purchase this chimney.

Elica chimney cleaning: Step by step guide

Elica auto clean chimney uses the heat auto-clean process to clean the chimney.

• To auto-clean your chimney check out the auto-clean button on the control panel.

• Press the button and the chimney will auto clean itself. Due to the amazing heating process, the oil impurities inside the chimney melts and the chimney gets cleaned.

• It will take only 10 minutes to clean the chimney. The oil impurities will be drained into the oil collector.

• After 20 minutes remove the oil collector with your hands and check the interiors of the kitchen chimney to ensure that your Elica chimney is working just fine.

This is the process of how to clean Elica chimney. I hope you like it.

Read more: