How to Clean Grout Between Floor Tiles?

It was difficult for me to clean the grout between floor tiles until I figured out a good way. I can share a few tips on how do you clean grout between floor tiles. I experimented with an easy DIY fix after noticing that the grout in my kitchen appeared discoloured. It was surprisingly satisfying.

How to Clean Grout Between Tiles?

To clean grout between floor tiles, follow these steps for a thorough and effective process:

• Step 1: To start, make a paste by combining water and bicarbonate of soda, also known as baking soda. Apply this paste with a stiff-bristled brush or your fingers straight onto the grout. If you are using your hand, put on cleaning gloves to prevent skin irritation. To give the paste time to act on the stains, let it sit on the grout for at least fifteen minutes.

• Step 2: Fill a spray bottle with a mixture of equal parts water and vinegar. Mist this mixture over the grout paste.  The combination will start to bubble, forming a thick mixture that helps lift grime.

• Step 3: Use your brush to scrape the grout after the bubbling has stopped. For optimal results, apply strong pressure.

• Step 4: Rinse the area thoroughly with water. Use a mop with plain water, changing the water frequently to avoid leaving soap suds. Soap residue can get trapped in the grout, attracting more dirt, so it's essential to rinse well.

You can follow these steps to help you clean grout between floor tiles.

Read More:

When our home was being built, I used to visit the construction site with my father. I used to see how the workers used to fill the gaps between tiles with grout and make it completely smooth. I loved watching this. But after years of moving into the house, I realised it can be a difficult task to clean these grouts. Yes, the grout that is used to fill gaps between tiles can accumulate a lot of dust, grime and mould which can eventually change the colour of the grout and make it really dull-looking. I can tell you all that I know about

how do you clean grout between floor tiles.

If you spill something on your tile floor, it can be absorbed by the grout. Because grout is a porous material that is why it easily absorbs stains. But there are many ways in which you can clean this grout. I will tell you about it.

How do I clean grout between floor tiles?

1. Before you start the cleaning process, sweep the tile floor or vacuum it.

2. Then make a solution of vinegar and water in a 1:2 ratio and spray this solution on the grout.

3. Leave the solution on the grout for a good 5-10 minutes and then scrub the floor with a stiff brush.

4. Then rinse the floor with clean water and dry it up with a clean cloth.

5. However, if there are still some stains on the grout, then apply commercial grout cleaner on the grout and scrub the floor.

6. Then again rinse the floor and dry it up with a clean cloth.

Regular cleaning will help to prevent stains from setting in and make it easier to remove any stains that do occur. I hope my answer helps you understand

how to clean grout between tiles.

Hi there,

A messy dirty kitchen is not only unhygienic but also a symbol of a messy lifestyle. I always prefer my kitchen deep cleaned. But let’s face it, the kitchen is prime to grease and grime. So, at times, even after regular cleaning, the grout may build up between the kitchen tiles. I have faced the issue of grout a lot and tried many successful and unsuccessful ways of tile and grout cleaning. I would love to share my successful tips with you on how to clean grout between floor tiles. Please read on to know the tips and tricks.

• A Hot Water Spray:

  The mildest cleanser for tile grout is a warm water spray. Simply mist the tiled surface with water and scrub the grout lines with a soft bristle brush. Using a dry cloth, wipe the surface. 

• Vinegar and Water:

  Using a solution of equal parts vinegar and water, clean the grout lines of dirt and minor stains. Spray the grout lines with a moderate vinegar solution and let it sit for at least 5 minutes. Using a hard brush, scrub the grout. 

• Baking Soda and Vinegar:

  One of the most common home cures for removing stubborn stains from tile grout is baking soda. Making a mixture of baking soda and water and applying it to the grout lines is the first step. Then spritz the baking soda paste with a combination of equal parts vinegar and warm water. Rinse well with warm water.

• Hydrogen Peroxide:

  Spray hydrogen peroxide on the grout lines to eliminate dirt and stains if the tile grout has moderate stains. Scrub with a bristle brush, then rinse and wipe with warm water. You can also use hydrogen peroxide and baking soda to produce a paste. Apply it to the tile grout right away and let it sit for a while. Using a brush, clean the grout lines. Warm water should be used to rinse the tiled surface.

• Routine Cleaning and Maintenance:

  Spray diluted vinegar on the grout at least once a week for routine cleaning. Warm water is used to clean. The grout lines should be sealed on a regular basis. 

These are the top 5 ways in which you can do your tile and grout cleaning. I hope it helps you.