How to Clean Mold in Attic?

Last week, while cleaning my attic, I noticed some mold growing in a corner. I didn’t know how to deal with it, and to learn how to clean mold in attic, I called a friend. My friend owns a cleaning company, and he suggested that I wipe the moldy area with a rag and detergent to stop them from spreading. He asked me to dispose of the rag. 

How to Get Rid of Mold in Attic?

Before getting started, he suggested that I procure a few pieces of protective gear, such as disposable clothing, gloves, and a face mask. He said these are important for avoiding contact with the mold spores. He also asked me to open the attic window before starting the process. 

I have added the steps for the process of removing mold below.

• My friend asked me to mix one cup of bleach with around 3 litres of water. 

• Next, I had to spray the solution on the mold-infected area and let it sit there for 15 - 20 minutes. 

• After that, I had to use a brush to scrub off the mold. 

• Finally, I wiped down the area with a clean and damp cloth. 

This is how to remove mold from attic. As mentioned by Arun, my friend also suggested that I can use Vinegar and baking soda in the same way to get rid of mold. 

Maintaining interior air quality and avoiding structural damage requires you to learn the process of removing mold from attic plywood.

• To prevent the mould and safeguard the rest of the house, prepare the area by enclosing the attic with plastic sheeting.

• Ensure adequate attic ventilation.

• Use the HEPA (High-Efficiency Particulate Air) vacuum to clear the afflicted regions of any loose mould spores and dirt.

• Use a brush and the detergent solution to clean the mold-infested plywood. As necessary, rinse and repeat.

• You can create a homemade attic mold removal spray by mixing equal parts white vinegar and water in a spray bottle. Spray the affected areas, let it sit for about an hour, and then scrub gently. Rinse with clean water. Vinegar has natural mold-fighting properties and can be an effective and non-toxic solution.

If the mould infestation is extensive or persistent, consider consulting a professional mould remediation specialist to ensure complete removal and remediation. If you are wondering “how to locate any attic mold removal near me?”, you can get a deep home cleaning service from NoBroker, and make your home spotless from top to bottom.

Read More:

Before telling you how should you clean the mold, I would like to begin by telling you how to prevent mold in attic. There are many techniques you can acquire to prevent molds in the attic. Summers are over and now comes the monsoon which can cause molds and mildews in the house due to dampness. So, there are measures you can take to prevent mold formation in home but if mold occurs in the attic you need to prepare yourself for attic mold remediation.

What are the measures to prevent mold formation?

You can consult an attic expert who can help you control the interior and exterior temperature of the house. Seal the points where the air can easily come and also look out for damaged or blocked ventilation. Fix the ventilation if you find any damage. Seal the cracks to reduce the moisture and repair the roofs so that the water doesn't seep through the walls. You can also use insulation like cellulose to control the growth of mold. 

How to remove mold from attic plywood naturally?

To remove the mold from the attic you need to cover yourself. To cover yourself you will need:

• A breathing mask

• Safety eye glasses

• A pair of rubber gloves

• Protective coverall with a hood

1. To remove the molds you need to empty your attic first. Remove all the items and keep them under the sun. 

2. Seal the windows and doors with a plastic sheet. After sealing you can start drying the molds since drying them will stop the spreading of fungus or spores.

3. To clean the molds, you will need:

• White Vinegar- 1 teaspoon

• Tea tree oil (substitute for vinegar)- 1 teaspoon

• Water- 1 cup of water

Spray the solution by mixing the three ingredients equally in a bottle. Clean the attic by brushing the area affected by mold. After cleaning dry the area by removing the plastic sheets.

You can also hire contractors who remove molds. The attic mold removal cost may vary from one company to another. 

I hope you know the process of attic mold remediation now.

Read more: