How to Clean New Tiles after Grouting?

Hi Lara, I got my bathroom renovated and got new tiles in place. I wanted to find out how to clean new tiles after grouting as there was grout haze formation on the tiles. The grout haze happens during the installation process due to grouting. If you see that your tiles are looking like they’re covered in a cloudy film, it’s a grout haze. I have cement tiles at my home and cleaned the tiles using a process that I have shared below.

How to Clean Newly Grouted Tile?

Here is the process you can follow:

1. Take a soft and non-abrasive cloth and wet it. Wring out all the excess water.

2. Wipe the tiles with it till you see the haze has disappeared.

If this doesn’t work, use a rubber float. It is like a large squeegee. 

1. Rub the float over the dampened tile in a back and forth motion till the haze goes away. 

2. Use a heavy duty sponge to clean the surface.

3. Wipe dry the area using a soft cloth to finish.

This is all about the process. I hope you find the steps helpful.

My husband did fill the gaps in tiles but of course, men aren’t that clean you know. I am not a pro hence cannot tell you the professional method on how to clean tiles after grouting but can share how I cleaned the tiles. It worked perfectly fine so just grab some soda and a mug of water and follow the process I am sharing with you next.

How to Clean New Tiles After Grouting at Home?

It is easy to clean tiles after grouting. All you have to do is:

• Allow Grout to Dry: First, let the grout dry for at least 24 hours. This ensures that the grout is fully set and won’t be disturbed during cleaning.

• Apply Baking Soda Paste: Create a paste by mixing baking soda with a small amount of water. Spread this paste over the tiles, especially on areas with visible grout haze. Let it sit for a few minutes to soften the haze.

• Scrub and Wipe Clean: Gently scrub the tiles using an old toothbrush or a soft-bristled brush to lift the grout haze. Once you’ve scrubbed all the tiles, use a damp cloth to wipe away the baking soda paste. Ensure no residue is left behind by rinsing the cloth frequently. Finally, dry the tiles with a soft towel to leave them clean and shiny. This method ensures your tiles look pristine without using harsh chemicals.

As Priyank mentioned, you can also use vinegar and water solution but I find vinegar acidic hence I used soda. It helped me clean the tiles completely hence you can try it out. There are also cleaning solutions available in the market but better to avoid using them as they are quite harsh and might damage the flooring.

Hope this clean grout from tiles after tiling will be as helpful to you as it was for me. 

Cleaning new tiles after grouting is essential to remove any excess grout residue and ensure a clean, professional finish. If you want to learn how to clean tiles after grouting, I can tell you that for stubborn grout residue, you may need to use a grout haze remover. I used that because the grout residue was too stubborn on my tiles. But I would also mention here that if you have natural stone tiles, such as marble or granite, avoid using acidic cleaners. Instead, use a neutral pH cleaner specifically designed for natural stone. Don't use abrasive sponges or scouring pads, as these can scratch the tiles. 

Best Way to Clean Tiles After Grouting

Here's a step-by-step guide to cleaning new tiles after grouting:

1. Wait for the grout to cure: Allow the grout to cure for at least 24 hours before cleaning. This will ensure that the grout is fully hardened and ready for cleaning.

2. Prepare your cleaning solution: Mix a solution of warm water and white vinegar in a ratio of 1:1. White vinegar is a mild acid that effectively dissolves grout haze without damaging the tiles.

3. Dampen a sponge or cloth: Wet a sponge or soft cloth with the vinegar solution and wring it out until it's damp but not dripping.

4. Clean the tiles: Start cleaning the tiles in small sections. Work in one direction to avoid spreading the grout haze. Gently scrub the tiles with a damp sponge or cloth to remove any excess grout residue.

5. Rinse the sponge or cloth frequently: Rinse the sponge or cloth frequently in clean water to remove any accumulated grout. This will prevent you from spreading the grout haze around.

6. Dry the tiles: Once you've cleaned a section, use a dry microfiber cloth to dry the tiles thoroughly. This will prevent water spots from forming.

7. Repeat for the entire area: Continue cleaning and drying the tiles until the entire area is clean.

Now you know all about clean tiles after grouting.

Many of you think that wiping down the tiles with a sponge will remove any extra grout that has been collected. Grout involves additional cleaning to eliminate the residue. Clearing grout haze isn't the most enjoyable task on the globe. But it's the final step before you can relax and enjoy the fresh floor. So let's understand the process of cleaning tiles after grouting.

How to clean new tiles after grouting?

You can either hire experts or specialists to remove the grout you can make it a DIY project. You will be able to make your tile look brand new in only a day after it's been installed. Let me This article will show you how to acquire that sparkling polish and say goodbye to that irritating grout.

Guide to cleaning tiles after applying grout with vinegar:

• If you want to clear the haze left on the tiles, wait until the grout has hardened.

• You can start grout cleaning as soon as 24 hours after the grout is dry and continue for up to 10 days. 

• You don’t have to wait for more than 10 days, because it will make this situation much more difficult. 

• All you'll need to clean grout is just some white purified vinegar, warm water, a container, a brushy sponge, and a sweeper. 

• In your container, make a solution of one portion of vinegar and four portions of warm water. After that, you can sweep up the grout on the floor. Some places may require a second or even third wiping, as well as more physical effort with the soft microfiber.

• The grout should be easily cut through with white purified vinegar. This method will surely help with cleaning tiles after grouting vinegar.

• If the grout haze doesn't really come up or you let it stay a little too long, make a solution with 12 cups vinegar, 12 cups ammonia, 1 cup baking soda, and 2 quarts water, or buy a professional grout remover from the supermarket.

• You're ready to experience those completely new lovely tile floors once the haze has been removed.

Now you must have cleaned your tiles with this guide for cleaning tiles after grouting.