How to clean overhead water tank?

I wanted to see how to clean an overhead water tank at home. Since I had a Sintex Tank, I looked up videos on how to clean overhead water tank at home. It said if these steps are followed, the tank will be cleaned very easily. The tools needed are a high-pressure jet, water and detergent and a hard brush.

How to Clean Overhead Sintex Water Tank?

The steps are as follows:

1. Empty the tank- The first step is to empty the tank, You can also use a sludge pump to drain out the water and also the sludge. 

2. Scrub the Tank - The tank floors and walls have to be thoroughly scrubbed to remove dirt. Use a mask when scrubbing. Then wash the tank with the high-pressure jet.

3. Disinfecting the Tank and Pipes - First Disinfect the tank with a bleach to make it germ free. Then do the same for the pipes as well by running water through them.

4. Drying the Tank - All the residual water is drained out. Then the tank is left to dry. You can use the tank after it dries up.

I found this to be an easy process of how to clean overhead tank. I hope these steps also help you out. If you can't clean the tank, then you can hire professional cleaning services.

Read More: 

For the last few days, I discolored water was coming through our taps. After seeing this my father told me that the overhead water tank might have become dirty. He suggested me for an overhead water tank cleaning. I asked him how to do that and he told me the whole process. 

How to Clean Overhead Sintex Water Tank?

To clean the tank, my father told me about a few steps, which are

• Empty the Tank

My father told me to turn off the water supply to the tank and open the valve at the bottom to let all the water in the tank go out. 

• Scrub the Tank

He also told me that the inside of the tank would need scrubbing. He suggested me to use a bristle brush and scrub the inside of the tank thoroughly and remove any visible dirt and debris. 

• Rinsing the Tank

The next step after scrubbing the tank, comes rinsing. He told me to rinse the bottom and side of the tank thoroughly. 

• Treating the Water

After rinsing and cleaning the overhead water tank, he told me to treat the water using Chlorine. He told me about mixing a little bit of chlorine in the water and using that to clean the water tank. 

• Refilling the Tank

After the whole cleaning process had been completed he told me to close the bottom valve and refill the water again. 

And that’s what he told me about overhead water tank cleaning. Hope this helps. 

My father used to do overhead tank cleaning on a regular basis. He constantly used to inform me that maintaining the quality of the water supply in homes requires cleaning an overhead water tank. If this is neglected, filth, sediment, and dangerous germs may build up and represent a major threat to your health. Therefore, I have an idea of the easiest ways to clean the tank.

Over Head Water Tank Cleaning Tips

An organised and methodical strategy is required to properly clean an overhead water tank.

• Remove all of the water from the tank and switch off the water supply. You can do this by turning on the bottom of the tank's tap.

• Once the tank has been emptied, use a brush or vacuum to get away any debris.

• It is advised to wash the tank's walls and bottom completely with a non-toxic detergent or a solution of baking soda and water.

• To verify that all cleaning agents have been cleaned, repeatedly wash the tank with fresh water.

• For disinfecting the tank, make a solution of chlorine and water. Now, add it to the tank.

• Make sure to cover the entire inside surface and let it sit for a few hours.

• Drain the chlorine mixture and thoroughly clean the tank.

• Lastly, allow the tank to dry out entirely before adding fresh water to it.

By following the above steps, my father used to clean the overhead water tank. Every home will benefit from these easy steps in terms of overall health. I hope you found this answer on how to clean the overhead water tank helpful.

1. Turn off the water supply: First, turn off the water supply to the tank to avoid any contamination of the water during the cleaning process.
2. Drain the tank: Drain the water from the tank completely using the tap or valve provided at the bottom of the tank.
3. Remove dirt and debris: Remove any dirt, debris, or sediment present at the bottom of the tank using a brush or scrubber. It's important to remove all debris as it can harbor bacteria and other microorganisms.
4. Scrub the tank: Scrub the inside walls of the tank using a brush or scrubber. Use a mixture of water and cleaning solution such as bleach or vinegar to thoroughly clean the tank.
5. Rinse the tank: Rinse the tank thoroughly with clean water to remove any remaining cleaning solution and debris.
6. Disinfect the tank: Disinfect the tank using a solution of water and chlorine bleach. Mix one liter of bleach with 20 liters of water and pour it into the tank. Leave the solution in the tank for two hours, then drain it and rinse the tank thoroughly.
7. Refill the tank: After cleaning and disinfecting the tank, refill it with clean water. Turn on the water supply and let the tank fill with water. Then clean it properly and your tank had been cleaned.

I remember I used to clean the overhead water tank installed on rooftops with my mother when I was a kid. She told me that periodical cleaning of overhead water tanks is necessary to keep the water fit for use. Let me tell you how to clean overhead water tank at home easily:

Firstly, drain out the water. Please ensure that all the water that is drained out is put to some use for your household chores and not wasted.

After draining the tank, clean the tank using water and dishwashing soap. This will help you get rid of stains, algae, fungus, and dirt. Once the cleaning is done, all you have to do is wipe the surfaces with a damp cloth.

You can even sanitize the overhead water tank using a disinfectant. However, don’t forget to clean the overhead water tank with water by filling it up a bit and running it through your pipes.

Once you have drained the water used for rinsing your overhead water tank after cleaning, just leave the tank to dry and after it is dry you can fill it up with fresh water for your usage.

This is how to keep overhead water tank clean.

Read more:

I hope now you know how to clean overhead water tank at home.