How to Clean Sliding Window Tracks?

Cleaning window tracks could be daunting if you are not aware of the right steps. I was in the same situation when I discovered a thick layer of dirt and grime in my sliding window tracks. I tried to clean it but was unsuccessful the first time. I was wondering how to clean sliding window tracks when my wife said that I should at least start by dry dusting the tracks. So I did. I will give you the precise steps below to follow.

How to Clean Tracks of Sliding Windows?

Before beginning the process grab a few supplies such as a screwdriver, distilled vinegar, vacuum cleaner, baking soda, a spray bottle, an old toothbrush and a few microfiber cloths. Now, you are ready to follow the steps.

• Take the spray bottle and pour a cup of distilled vinegar in it.

• Now, use the screwdriver to loosen the dirt and use the vacuum cleaner to remove them.

• Sprinkle a little bit of baking soda over the window tracks. 

• After that, spray vinegar over the baking soda. 

• Next, use the toothbrush to loosen the dirt.

• Wipe the area with the microfiber cloth to clean it. 

• Repeat the process a few times until it gets clean and also switch the cloth everytime. 

And that’s how to clean sliding window rails. The process is simple and easy but a bit time-consuming. I hope this helps. 

I noticed dirt buildup inside of my sliding window tracks two weeks ago, and hence, it was becoming harder to open and close them. Before tackling these filthy spots, I researched how to clean sliding window tracks easily. I came across a YouTube video where I found that it can be cleaned using only a kitchen scrub sponge. Scroll down to get the detailed steps I performed.

How to Clean Sliding Window Rails?

I performed the following steps to clean my sliding window rails within a few minutes:

• I first cleaned the window track with a standard kitchen scrub sponge.

• I marked each track segment's location on the sponge with a marker.

• After that, I cut through the lines on the sponge's bottom using a knife. You must cut the full depth of the sponge as this may require multiple knife strokes.

• I finally pushed the sponge along the track after wetting it with warm, soapy water. All done! My windows now move smoothly and silently.

One thing you must keep in mind is that larger dirt can still be present after the sponge reaches the end of the track. Simply clear it out and move the sponge along the track once more.

Moreover, I must say cleaning the rails required a lot of work on my part. Therefore, I will advise you to hire a professional and get it cleaned properly. 

I hope you get an idea of how to clean tracks of sliding windows.

Hi there. We have large sliding windows at our home and often clean them along with the window tracks. So, I can show you how to clean the track of a sliding door on your own. We usually clean the tracks using a solution of vinegar. Let me tell you the complete process below.

How to Clean Sliding Door Tracks?

Ideally, you should clean your window tracks around 2 to 4 times a year to keep them working without any issues. Here is the cleaning process I follow at home.

1.  First, grab a soft-bristled brush and scrub the surface of the window tracks with it. This will loosen the dirt accumulated on the tracks.

2. Take a vacuum cleaner ]with a cervical attachment. Remove the loose dust off the tracks with the vacuum.

3. Mix warm water and white vinegar in equal amounts and transfer the solution to a spray bottle. 

4. Spray the solution over the tracks and ensure that the surfaces are covered well with the solution. 

5. Leave the solution for a few minutes, and then scrub the tracks with a toothbrush. 

6. Using a soft, damp microfiber cloth, get rid of debris and the cleaning solution.

7. Do this till you see that the tracks are free of dirt and any unwanted material.

8. At last, take a dry microfiber cloth and wipe the tracks dry. 

This is how to clean track of sliding doors. I hope you’ll now be able to clean the tracks of your windows.

Hey there,

I have seen days when even the most beautiful views had been ruined by dirty window tracks. Whether I leave my windows open or closed, dust, insect carcasses, mildew, and even mould collect in the tracks. Regular maintenance is required, however, window tracks are difficult to clean with standard tools. Not just that, dirty sliding glass window tracks might make it difficult to open and close your door. So it is very important to know

how to clean sliding window tracks because

cleaning them once a week will assist to reduce the amount of dirt and grime that has built up on the window and make it easier to maintain. I am going to tell you the ways I follow to clean my window tracks.

How to clean window tracks?

• Vacuum the tracks by opening the door. Reach into the corners of the tracks using a vacuum attachment. Attempt to lift any larger pieces of dirt or debris to make the rest of the cleaning easier.

• 1 cup (240 ml) water, with a drop of nonabrasive cleanser Fill a pail with warm water and a few drops of a cleanser, such as Murphy Soap, denatured alcohol, or dish soap. Combine the two solutions.

• Using a wire brush and cleaning solution, scrub the tracks. If you don't have a wire brush, a toothbrush will suffice. Scrub the inside of the tracks with the brush dipped in the solution. Working your way from one side of the tracks to the other, pay special attention to trouble spots with stuck-on dirt.

• To know how to clean window tracks with sponge use a soft sponge or a

  rag or paper towels, and wipe clean the tracks. Wipe the tracks down with a paper towel or dry rag once they've been cleansed. Remove any dirt traces from the tracks.

• Close the door and vacuum and scrape the tracks of the other door. To finish the cleaning, close the door and vacuum, and scrape the other door's tracks. Your tracks should be cleaner once you're done.

• To keep your doors moving smoothly, clean your tracks once a week. Weekly cleaning can assist keep dirt and grime out of your tracks and ensure that your door operates effectively. Allow no dirt to accumulate in your tracks.

These are the steps I follow. I hope now you too know

how to clean sliding window tracks.