How to Clean Tap Filter?

Tap filters can get clogged overtime and it is essential to clean them at regular intervals as you can face slow running water situations. It happened with me and I discovered how to clean water tap filter. It is easy and can be done without any professional tools. These are the steps below that I followed.

How to Clean a Tap Filter?

• Before starting, I turned off the water supply to the tap to prevent any leaks. I placed a small bowl under the tap to catch any residual water.

• Most tap filters can be unscrewed by hand. I grasped the filter gently and twisted it counterclockwise. If it’s too tight, you can use a cloth for a better grip but avoid using tools that might damage the filter.

• Once removed, I rinsed the filter under warm running water. I used a soft brush to remove stubborn deposits. For more thorough cleaning, I soaked the filter in baking soda and water for about 30 minutes. It helped me in dissolving mineral deposits and limescale.

• After soaking, I scrubbed the filter again with the brush to remove any remaining grime. I rinsed it thoroughly under water to ensure all baking soda and debris were washed away.

• Once the filter was dry, I screwed it back onto the tap. I checked for any leaks by turning the water supply back on slowly.

Now I keep a regular check on the tap filter to ensure smooth flow of water. I hope this helps you in your cleaning process. You can also hire professionals for a better result at minimal costs.

Read More

Recently, I found that the taste of the water at my home was impacted. So, I checked my tap filter and found that it got clogged with dirt. I thus looked up online how to clean tap filter at home. I discovered that a vinegar and warm water solution is a simple way to clean a tap filter. Read on to get the detailed steps.

How to Clean Water Tap Filter?

To maintain the quality of the water being used for cooking and drinking, I found that it is necessary to clean the tap filter regularly at home. I have followed the below process to clean my mixer tap filter:

• I began by unscrewing the faucet's filter and shutting off the water supply to the tap.

• I next cleaned the tap filter under running water to get rid of any sediment and loose material.

• I then immersed the filter element in a vinegar and warm water solution. I let it sit overnight to release any accumulation.

• I next used a brush to gently scrub the filter to get rid of any last bits of debris and grime.

• I finally reassembled the tap filter and screwed it back onto the tap after cleaning it.

You can also quickly clean your water tap filter and make sure your family drinks clean water by following these easy instructions. I hope this helps you get an idea of how to clean mixer tap filter.