How to close AC hole in the wall?

Hi Saaz. During the installation of the AC in our room, a hole was left behind. I fixed it using patching material. So I can help you with how to close AC hole in the wall. You won’t need a lot of items for this and the process is pretty simple. I will list down the entire method for you below.

How to Close AC Hole Easily?

Here is the method to close an AC hole:

1. The method doesn’t vary much if you have a small or a big AC hole, but the product will be a different one to use.

2. For small holes, I consider you to use an interior filler to patch the hole. Use a putty knife to spread the filler well.

3. Be careful to only patch till the wall level to avoid sanding a large amount of the filler later on.

4. As for bigger AC holes, use a wall repair patch. Follow the manufacturer’s guidelines to use the product.

5. Once all the filler and patch cure, use a sanding sponge to flatten the region. 

6. Wipe the area with a clean cloth before you prime and paint the wall.

That is all you have to do. I hope this turns out helpful to understand how to close window AC hole.

Get Your AC Professionally Installed and Repaired by NoBroker AC Technician!

Some related information:

How to Make a Hole in Wall for Air Conditioner?

During last year’s winter, we had a problem when we discovered a hole in the wall around the area where our AC was installed. This led to air passing through the hole and caused us a lot of trouble. Hence, I decided to learn how to cover air conditioner hole in wall. 

I used copper mesh and silicone caulk to seal the hole, and the overall result was quite good. I have a few more ways through which you can overcome this problem in your house. So, let me share those with you one by one.

How to Close Air Conditioner Hole?

Here are two ways to cover a hole in your wall made because of an AC.

1. You can use copper mesh and silicone caulk like I did. For this to do the work, you’ll have to push the copper mesh and fill the hole with the silicone caulk. You can ask for these materials at a hardware store near you. 

2. Another solution I came up with is the wall hole cover. It is a plastic cover made out of polymer and comes with a great deal of toughness. You can find the product online under the name wal hole cover. 

This is how to seal air conditioner hole in wall. I hope my response helps you resolve the issue you’re facing.

Sealing an AC hole in the wall requires careful attention to ensure a neat and weatherproof closure. I will tell you some tips about AC hole cover. By following these steps carefully, you can effectively close the AC hole in the wall, restoring the integrity of your home's interior and maintaining a clean, aesthetically pleasing appearance. 

How to Cover AC Hole in Wall?

Here's a step-by-step guide to effectively close the AC hole:

1. Gather Materials: Before starting, gather the necessary materials, including a measuring tape, utility knife, expanding foam sealant, plywood or drywall patch, joint compound, sandpaper, and paint that matches the wall color.

2. Measure and Cut Patch: Measure the dimensions of the AC hole and cut a piece of plywood or drywall slightly larger than the hole. This patch will serve as a backing for the sealant and provide a surface for finishing.

3. Fill the Hole: For AC hole filling apply expanding foam sealant around the perimeter of the hole, ensuring it fills the gaps and provides a firm base for the patch. Let the foam expand and cure as per the manufacturer's instructions.

4. Attach the Patch: Once the foam has cured, trim any excess foam and insert the plywood or drywall patch into the hole. Secure the patch using screws or nails, ensuring it sits flush with the wall surface.

5. Apply Joint Compound: Apply a layer of joint compound over the patch and surrounding area, smoothing it out to create a seamless transition between the patch and the existing wall. Let the compound dry completely.

6. Sand and Paint: Once dry, sand the compound to create a smooth finish. Apply a coat of primer and then paint the patched area with the matching wall color, blending it seamlessly with the surrounding wall.

7. Inspect and Touch Up: After the paint dries, inspect the repaired area for any imperfections. If necessary, apply additional joint compound, sand, and touch up the paint to achieve a flawless finish.

This is how to close window AC hole.

You may still have a significant hole in your wall if you have removed a wall-mounted air conditioning system. Even I faced this issue when I decided to remove the AC from my room. I know how it feels to see that irritating hole in the wall. So I have curated some ideas on how to close AC hole in wall.

How to close AC hole in the wall?

1) Prepare Material

You must prepare the area and gather resources to start the work. There will be various occasions where having an additional thing will be really beneficial. Ensure you have some protective coating on the flooring inside the house in addition to a friend or relative.

2) Take Out the AC

You should remove the air conditioner from the wall in the early phase of this procedure. The screws securing the air conditioner in position should be visible once you remove the trim. You must take away the sealant that holds the air conditioner and the wall in strong contact. The air conditioner should begin to loosen as you remove this away.

3) Fill Up the Hole from Inside

The first thing you'll need to do is construct a frame that will fit inside this rectangle. Your frame will be properly connected to the studs on the inside of the wall, which are most likely visible. Now that the structure is in place, you can finish the job by covering the hole with drywall.

You must begin smoothing out and joining the two parts of the wall with a mixture of drywall adhesive and cement. When you start sanding and smoothing off the compound, be sure it has completely dried.

4) Fill up the Hole from Outside

Select insulation that is suitable for your climate and environment. You have to install the insulation from the exterior of the house and then cut a sheet of plywood to cover the opening.

After you've installed the insulation and plywood, you can begin preparing the exterior of the house to appear its best. When you're done, make sure the outside and inside of the house appear the same as they were before the wall AC was installed. This will help you with how to cover an AC hole in the wall.

How to close AC hole in wall must be clear to you now.