How to Connect Washing Machine Pipe to Tap?

Hello Sahil. We bought a Bosch washing machine a few weeks ago. I connected the machine pipe to the water tap in my home. So, I would be able to share how to fit washing machine pipe to tap. You’ll find one of three varieties of machine pipes. Mine had the modern tap with ½ inch inner thread. I will share the steps with you below.

How to Put Washing Machine Pipe to Tap?

Here is the method you can to place the machine pipe on your water tap:

1. Remove the bottom piece of the water tap.

2. Now, wrap the white tape around the threading of the BSH adapter. You can buy the adapter from any hardware store.

3. Then, you can connect the adapter to the tap.

4. Connect the inlet hose of the washing machine to the adapter.

That is all. You’re done connecting the tap with the machine pipe. I hope these steps will help you with how to attach washing machine pipe to tap.

Get Washing Machine Inlet Pipe Installation or Replacement Done for Your Washing Machine Via NoBroker Plumbing!

Some related information:



How to Install washing machine?

Hi, I can understand attaching washing machine pipes could seem like a daunting task but it isn’t. Last month my uncle’s washing machine went bad, so he bought a new Samsung washing machine. After purchasing that, he was facing the issue of how to attach washing machine pipe to tap. So, he asked me to help him out. 

How to Fit Washing Machine Pipe to Tap?

Here are the steps that I told my uncle about.. 

• The first step was to remove the adaptor from the water supply house. 

• After that, I asked him to loosen the screws of the adaptor using a plus screwdriver. 

• Following that, I instructed him to connect the adaptor to the tap and tighten the screws. 

• Now, I asked him to tighten the bottom part of the adaptor. 

• After that, I told him to attach the pipe to the adaptor and then to the inlet water valve of the washing machine. 

And that’s how to put washing machine pipe to tap. I also told my uncle that if he is not able to follow the steps of how to connect automatic washing machine to tap, then he can hire a plumber and get that done. 

But he was able to follow the instructions and get that attached. I hope these steps about how to attach washing machine pipe to tap, would be of help to you. 

Water is the second most crucial requirement after power for a washing machine to function properly. To wash and rinse garments thoroughly, you need a constant, sufficient supply of water. It's easy to attach a washing machine to a tap. Nevertheless, after buying a washing machine if you are wondering how to connect washing machine to tap, you can complete this on your own or even with the help of customer support, since it is typically handled during installation and demonstration.

Recently my parents got an IFB washing machine. So they wanted to know, how to connect IFB washing machine to tap. I provided them with a general guideline about the same. 

The straightforward measures one must take to connect the washing machine hose to the faucet are as follows.

• It is necessary to detach the adaptor from the water supply hose. With the use of a "+" type screwdriver, you can remove the screws from the adaptor.

• The adaptor and tap can now be connected. Now that the screws are tightened, you can make sure the two are securely fastened.

• Arrows are generally painted on the lower part of plastic adapters to advise users as to which way to turn them. The next step is to carry out this.

• Now, connect one end of the washing machine's inlet hose pipe to the adaptor that is connected to the tap and the other end to the inlet valve.

I hope this helps!

Read More: