How to Drill a Hole in a Wall?

We wanted to hang our wall decor pieces like paintings and photo frames, and needed to know how to drill a hole in a wall properly without damaging it. My flatmate came up with some tips online, and we tried it together. The most important part here is to use the right drill bit. It should be the same size as the wall anchor. I am sharing a detailed guide below.

How to Drill a Hole on the Wall?

The first tip is to use the right drill bit. If you’re using a wall anchor that is larger than the hole, hold the wall anchor with the help of a tape when you’re drilling. Here are some more steps you need to follow on how to drill holes into walls.

• Make sure you drill slowly to prevent any cracks. Use a hammer metal drill and a masonry bit, which should be the same size as the wall anchor.

• Another important tip is to use the right wall anchor, that’s the same size or slightly smaller than the pilot hole. Using a hammer, gently tap the wall anchor into place. 

• We also read that it’s important to avoid electrical wires and pipes when you’re drilling into walls. Don't drill in places where electrical switches are present. If you are not sure of the location of electrical wires, contact a professional who can assist you. 

• If you’re drilling into drywall, use drill bits that are of the same size or slightly smaller than the wall anchor, to ensure a tight fit. 

Safety Measures While Drilling

We also found some safety tips when drilling a hole in the wall.

• Wear safety glasses to protect your eyes from debris.

• Use a dust mask so you don’t inhale the dust particles. 

• Make the space you are drilling in well-ventilated to avoid fumes from the drill.

I hope this helps.

Read more

I bought a new mirror and was trying to get it installed but could not as there was no proper tools and I was not aware of how to drill a hole in wall. I called a friend and asked him about how to do it. He told me about the tools and the process of drilling into the wall. Here is what he told me. 

How To Drill Holes Into Walls?

He said I would need two things and those are a drill machine and drill bits. He also told me that I should choose drill bits according to the material that I was going to drill on. Here are the types that he mentioned. 

• Drywall bit for sheetrock or plasterboard. 

• Masonry bit for brick, stone, or concrete

• Spur point bit for wood walls

• Tile bit for tile, ceramic, or glass

I bought a Masonry bit as my wall was made of brick and concrete. Here is how to drill a hole on the wall. 

• He told me to locate and mark the spot as

  X

  , in which I needed to drill.

   

• He asked me to mark the drill bit with tape for the correct depth. 

• My friend also told me to wear glasses and put on a mask before I start drilling. 

• He said that the tip of the drill bit should be placed on the

  X

  mark, 

• After that, he told me to hold the drill machine straight and squeeze the trigger. He also said that I should release the trigger in between to ensure it's drilling straight. 

And that’s all he told me about how to drill a hole in wall. I hope this has been helpful. 

A concrete wall can be hard to drill. You may need to drill a wall for many reasons such as installing furniture, home appliances etc, even you might need to drill a wall to fix it. Therefore it is important to learn how to drill a hole in a wall.

Step 1:

To drill hole in walls, mark the positions where you want to drill a hole with a pencil on the wall.

Step 2:

Now to understand how to drill into concrete walls, wear your goggles and insert the tungsten carbide masonry drill for the desired size of hole you want to with the hammer drill. Now properly grip the handgun with your hand. The drill should be perpendicular to the concrete for avoiding mistakes.  The drill's hammer may recoil while working.

Step 3:

Create a guide hole that is 1/8 to 1/4 inch deep.

Step 4:

Now if you feel confident turn up the speed but make sure to have a good grip on your hammer drill. Concrete walls do not have air pockets so you can lose control of the tool. So, be very careful while drilling a hole.

Step 5:

If you feel that you have reached a spot where you cannot drill into concrete, don't force it as it can affect your drilling machine and the wall. Use a simple nail and hammer during these kinds of times and give a few tap to break the obstruction.

Step 6:

Drill and also brush away dust periodically. Take 15 sec to 20-sec pause to drill the hole.

Step 7:

Now remove the concrete dust with a vacuum and also wear goggles while removing the dust.

Step 8:

Repeat the process. You can also learn how to drill a screw into a wall with this method.

Read more: