Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to fit a ceiling light?

view 210 Views

3 Answers

2 Year

Comment

whatsapp [#222222128] Created with Sketch. Send

Hello Brijesh. I have done my masters in electrical engineering. I often spend my free time fixing old appliances that I like. I am the one who replaced the light bulbs in our house. So, I can show you how do you fit a ceiling light in a detailed manner. You can take this procedure as a guide because the process can vary based on your exact light fixture.

Ceiling Light Installation

Here is how you can fit a ceiling light in your house:

  1. Go to the circuit box and turn off the main power supply. After that, paste a note on the door of the circuit box which says ‘don’t open, work under progress’.

  2. Check that the power is off by switching the light switch on and off. Keep the switch in an off position.

  3. Take off the current ceiling light and detach the old fixture from the box. This can differ based on the ceiling light you have.

  4. Hang the fixture to the box using a bent piece of coat hanger. Screw a screwdriver to unscrew the wire nuts and detach the wire connections.

  5. Remove the old strap from the box with the same screwdriver.

  6. Use diagonal cutting pliers to nip off the bit of bare wire present in the connection. Strip off about ¾th inch of insulation. 

  7. Install the new strap that is provided with the replacement fixture.

  8. In order to avoid straining the connections, hang the new fixture from the box using the bent coat hanger temporarily. 

  9. Start with the uninsulated or green insulated copper grounds, hold the stripper ends side by side and twist on a wire nut clockwise. 

  10. Join the white wire to the white one and the black wire to the black one. My fixture used screws for mounting to the box. So, I started mounting the screws in the strap. 

  11. After this, you have to position the fixture and tighten the screws using a screwdriver.

  12. Look at the fixture base to see the maximum wattage bulb that can be placed. Screw the bulb and turn on the power supply. Test that the bulb glows on switching the light switch.

This process is pretty complicated. So, I’d advise you to ask a professional electrician to do the installation. I hope this helps you understand how to install a ceiling light.

Securely Replace and Install Light Bulbs Via Professional Electricians of NoBroker! Some related information:

How much Does it Cost to install lights?

0 2023-10-27T08:39:25+00:00

Are you looking to brighten up your space with a new ceiling light fixture? Then learning how to install a ceiling light fixture is important. If you're familiar working with electrical components, installing a light fixture in a ceiling can be a do-it-yourself work.

How to Install a Light Fixture in Ceiling?

Follow these steps on how do you fit a ceiling light;

  • Turn Off the Power: 

To avoid electrical mishaps, make sure the current light fixture's power is turned off at the circuit breaker.

  • Take Down the Old Fixture:

To expose the electrical cables, unscrew and take down the old light fixture from the ceiling.

  • Detach Wires: 

Take off the wire nuts and carefully detach the wires, which are usually coloured black for live, white for neutral, and green or bare for ground.

  • Prepare the New Fixture:

Assemble the new light fixture in accordance with the manufacturer's instructions, paying close attention to how the wires are threaded through any mounting brackets.

  • Connect the Wires: 

The wires from the fixture should be connected to the matching wires in the ceiling. Black to black, white to white, and green/bare to green/bare are the usual pairings. Use wire nuts and electrical tape to ensure security.

  • Mount the Fixture:

Use screws or a mounting bracket to fasten the fixture to the ceiling. Follow the instructions from the manufacturer.

  • Tighten the Canopy: 

The canopy, which hangs from the ceiling and covers the wiring, needs to be firmly fastened.

  • Turn on Power:

Restart the circuit breaker and check that the light is functioning properly.

  • Final Installation:

Tie in any loose shades or globes and adjust as needed to ensure correct alignment.

I hope this helps you with how to fit a light fitting to the ceiling.

If you're unsure about any step, it's advisable to consult with an electrician to ensure safety and compliance with local electrical codes. Now that you know how to install a ceiling light fixture, I’d like to highlight that electrical work can be dangerous, so take all necessary precautions when working with wiring and fixtures.

Install a light fixture by NoBroker Electrician

Read More:

How to fix LED lights without a false ceiling? 
0 2022-03-07T20:19:03+00:00

You can customise your room in a whole new way with the help of ceiling lights. I have installed ceiling lights in my living room. What I liked about it is they are so classy and can give your home a perfect look. It comes in various attractive designs, shapes and colours. You can customise it as per your choice and room. I suggest you give this brilliant idea a try to decorate your house. You will definitely love the ceiling light fittings.

Guide on how to fit a ceiling light:

1) You have to turn off the power to the area or region of the home in which you're putting the light at the power switch or fuse box. Otherwise, there will be chances of electric shock

2) Arrange the parts of the new set such that they are conveniently accessible.

3) Now detach the fixture properly and remove the connections between both light cables and the house cable. They are covered with plastic covers.

4) You should check the wiring before disconnecting with the voltage checker. It’s just to confirm that no current is flowing through it.

5) Check the box or support where you are going to attach the lights and fix it if needed.

6) Connect the light fixture's cables to the connection box's wires. You have to connect the wires as directed by the light's instructions. This usually involves joining blue to blue and white to white.

7) Find the ground wire and attach it to the junction box properly. It can be a green or open copper wire.

8) Insert or bend all the cables together into the junction box by securing them.

9) Now attach the screws or bracket to the box as guided in the products manual.

10) Mount your light's cover or frame to the mounting hooks or frame using a screwdriver.

11) Attach the bulb as per your junction box capability and fix it.

12) Now turn on the switch and enjoy the whole new experience.

This should have cleared your doubt about ceiling light fittings.

Still need help installing ceiling, do it perfectly with NoBroker’s expert electricians. Read More: How to choose false ceiling lights? How to install a ceiling fan?

Most Viewed Questions

Recently Published Questions

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners