How to fit a kitchen sink into a worktop?

• Choose the best place for your kitchen sink.
• Now, decide the size and dimensions of the kitchen sink which is suitable for your kitchen.
• Go for the Ruhe online platform for the purchase of a kitchen sink.
• Install it with the help of your kitchen fitting expert.

A kitchen cannot be called a kitchen without a kitchen sink. The kitchen sink is one of the most important corners where you clean your veggies, and dishes and even drink water after channelling a line for a purifier. So, it is extremely important to install a kitchen sink. But how to fit a kitchen sink into a worktop? I will share an easy guide that can help you get a heads up on how to install a kitchen sink on a new countertop. Check out the kitchen sink installation guide below.

How to install a kitchen sink?

1. Before installing a kitchen sink please go through the template once. Place the template in the centre of the sink cabinet. It should be placed 1 ½ inches away from the countertops’ edge. Tape the template and mark the outline.

2. After marking the position remove the template and drill ⅜ inch diameter holes on four sides of the corner. Use a sabre-saw blade to cut along the lines you have marked previously.

3. Now it's time to insert the faucet and the sink strainers. Create a watertight seal between the kitchen and countertop. You can apply the plumber’s putty under the sink’s lip.

4. Gently flip the sink and insert it into the opening. Do not damage the putty while inserting the sink.

5. Generally, every sink is pulled down with the help of the mounting clip. You can follow the instruction manual for spacing the clips.

6. Connect the P-trap and attach the faucet lines to the hot and cold water supply chain with tubes and connect the strainer to the waste line.

Remove the aerator from the faucet and turn on the water to clean the system. You can reinstall the aerator later. 

This is the process of kitchen sink installation. I hope you find this informative.

Read more: