Hey there. I saw you asking how to fit a pedestal basin and I installed the same in my bathroom a while ago. So, I can help you by sharing the method.
How to Install Pedestal Basin?
Here is the complete process of installing a pedestal basin.
First, turn off the water supply before beginning the work. Fix the flexible tap hoses to the tap tails and attach the taps to your basin.
Fit the waste into its place as well. Position the pedestal in the place you want it to be and place the basin on top of it. See that the basin is fixed against the wall and sits well on top of the pedestal.
Use a pencil to mark the position of the basin fixing holes, screw holes, and pedestal.
Shift the basin and pedestal away from the wall. Take an electric drill and drill pilot holes in the floor and walls for the screws.
Fit the rawl plugs after this If you need to make any adjustments in the pipework, do it at this point.
Then, position your pedestal against the wall and screw in just part of the way.
Place the basin on top of the pedestal and take a spirit level to see if the basin is levelled. Use pilot holes as a guide to screw into the wall.
You then need to seal around the pedestal’s edges where it comes in contact with the floor and also align the basin’s back where it comes in contact with the wall.
Screw in the floor and screw fully.
Attach the waste pipe to the waste trap and connect the flexible connectors to the waste pipes.
Switch on the water at the mains and see if there are any leaks.
This is how to fit pedestal basin. I hope it helps you!
Get a Basin Installed In Your Bathroom Via Experienced Plumbers of NoBroker! Some related information:What is Wash Basin Installation Process?
Authors Of The Question
How to Fit a Pedestal Basin?
amisha
53Views
41 days
2024-07-29T21:20:57+00:00 2024-07-29T21:20:58+00:00Comment
1 Answers
Share