How to Fit Door Closer?

I had planned to install door closer at my workshop a few months ago. I searched about the procedure online and found that standard arm installation is the most widely used technique for installing door closers. This is the situation where an in-swing door closer is mounted on the hinge side. Read the answer to know the detailed procedure.

How to Door Closer Fitting?

With a few simple tools and the below steps, you can complete the relatively easy task of fitting a door closer:

• Choose the door opening, and draw two holes on the frame for the arm shoe and four holes for the door closer.

• For the included screws, drill the pilot holes in the door and frame.

• Using the screws that come with the door closer, attach the forearm or arm shoe assembly to the door frame.

• Now, install the door closer with included screws. The hinge edge must be the position of the speed-adjusting valve.

• Put the main arm perpendicular to the door on the top pinion shaft. 

• Use the included arm screw or washer assembly to secure firmly.

• When the forearm is attached to the main arm that is already loaded, modify its length so that it is perpendicular to the frame. 

• Using the included screw/washer assembly, connect the forearm to main arm.

• Finally, lock the pinion cap over the closer's shaft.

For fitting a chain door closer, you can follow the above steps. It is crucial to check that the arm moves freely and without obstruction. You must also ensure that the door closer is centered. I hope now you have an idea of the door closer how to install.

A door closer helps to close the door smoothly without slamming shut. You might have seen a door closer in offices, restaurants, shopping centres, and houses as well. Door closer fitting helps to protect the door from slamming abruptly. It is very easy to install a door. Read my answer to learn how to fit door closer.

What is the process of door closer installation?

To install a door closer you will need tools such as:

• Drill

• Drill bits (3.5mm for woods, 5.1mm for metals)

• Pencil

• Hammer

• Centre Punch

• Cloth or rag

• Screwdriver

• Socket wrenches

Step 1: 

Unpack the door closer and keep every item handy and organized.

Step 2:

There is a template that allows you to draw the outline of where it will be installed. It will help you to check where you want the holes to be, and the door closer will fit on the doorway.

Step 3:

Now draw the holes with a pencil. 

Step 4:

You can utilize the centre punch to mark the holes wherever you have drawn with a pencil. 

Step 5:

Now use the drill bits which are 3.5mm for wood and 5.1mm for metals. 

Step 6:

Whenever the debris comes clean it off with a rag and cloth. 

Step 7:

Put the door closer correctly in the right place and drill the screws through each hole.

Step 8:

Now check if the door is closing properly after completing the installation.

It is better to contact a technician for a door closer installation. You can end up damaging your door if you are not a pro in drilling the door.

I hope you know the process of

door closer fitting now.

Read more: