How to Fix a Dripping Shower?

A damaged gasket or mineral accumulation is often the cause of a leaking shower head. I recently hired a plumber from NoBroker to fix my leaking showerhead. So if you are wondering, “How to repair a shower head?”I can share the steps that he followed to fix the same.

How Do I Fix a Dripping Shower Head?

I hired a plumber from

, because of their reliable, professional service and reasonable prices. The steps that he followed in this regard are as follows,

Removed the showerhead

He used a handkerchief to prevent the wrench from scratching the fixture's finish as he unscrewed the showerhead. 

Soaked the shower head

To get rid of mineral buildup, he soaked the shower head in vinegar and water. According to the plumber, it is essential to immerse items with finishes made of brass, gold, or nickel for 30 minutes. You can soak other materials for a few hours.

Scrubbed the shower head

He used a stiff plastic brush and hot water to clean the shower head after soaking it.

Replaced the gasket 

Leaking water is another effect of a worn gasket. So, he swapped out the gasket for a matching one.

Wrapped the shower arm thread: 

He used the plumber's tape, also known as thread seal tape, to wrap the shower arm.

Replaced the shower head: 

Finally, he screwed the shower head back into place using the wrench and cloth once again.

Now that you know how to fix shower head leak, let me know in the comments below whether this step was helpful or not.

Read More:

A dripping shower is annoying, and I was facing the issue of a dripping shower for the last few weeks. Even my cousin was annoyed by the noise when he visited me. He asked me to fix it, and then I asked him how do you fix a leaking shower head? He suggested me to hire a plumber from NoBroker. 

How to Fix Shower Leaking Shower Head?

I hired a plumber through NoBroker and upon arriving, I asked the plumber how he would fix the issue. He told me about the steps while fixing the leak.  

• Turn off the main water supply of the whole house. 

• Start unscrewing the showerhead with pliers, and after opening it, take out a rubber ring from it. He said that water starts leaking when there is wear and tear in the ring. 

• Now, prepare a mix of water and three cups of vinegar in a pot and bring it to a boil. 

• Add the showerhead to that pot without the rubber parts and leave for around 25-30 minutes. 

• After taking it out, clean it using an old toothbrush and start reattaching the showerhead with a new rubber ring. 

• At the end, use the pliers to give it a final turn and then turn the water on. 

And that is how do you fix a leaking shower head, he told me. 

We were transforming our bathroom and during that I found myself facing the irritating question: "How do I fix a dripping shower head?" This annoying drip became a persistent reminder until we decided to revamp our shower. We started to uncover a solution to the dripping shower. We started by turning the water supply off first. Let me share the further steps below:

How Do You Fix A Dripping Shower Head?

1. Turn Off the Water Supply: The first step in fixing a dripping shower head is turning off the water supply to the shower. This ensures a mess-free exploration of the issue.

2. Remove the Shower Head: Unscrew the shower head carefully. Use a wrench if necessary, ensuring not to damage the shower arm. This step exposes the components that might be causing the drip.

3. Inspect and Clean: Examine the shower head for any debris or mineral buildup. A simple cleaning might be all it takes to resolve the issue. Soaking the components in a vinegar solution can dissolve mineral deposits.

4. Check the Washer: A worn-out or damaged washer is a common culprit behind a dripping shower head. Replace the washer with a new one, ensuring a proper fit.

5. Teflon Tape for Threads: Applying Teflon tape to the threads before reattaching the shower head helps create a tight seal. This simple yet effective step can prevent leaks.

6. Inspect the Shower Arm: While the shower head is off, inspect the shower arm for any damage or corrosion. A damaged arm might also contribute to leaks.

7. Reassemble and Test: Once everything is cleaned, replaced, and inspected, reassemble the shower head. Turn on the water supply and test the shower to ensure the drip is resolved.

These are the things that you can do if you wish to know how to fix dripping shower head.

Read more:

Last month, my sleep got interrupted so many times due to the monotonous drip-drip sound of a leaky showerhead. As you know, the leaky shower doesn't only makes noise but also wastes a lot of water. I was worried about how to fix a dripping shower head on my own. Then, I found the easiest tips to repair it. If you are also looking for the same, then scroll down to get the shower head fixing steps.

How to fix a leaky shower head?

The good news is that repairing a dripping shower is an easy task that anyone can complete with some patience and simple tools. The steps are as follows:

• Shut down the water supply from the mains and collect any extra water by keeping a towel or cloth.

• Soak the showerhead by removing it from a hose. 

• Dip the showerhead in vinegar for 30 minutes.

• Make use of an old toothbrush to get rid of dirt, grime, and limescale. 

• Thoroughly rinse it with water.

• For a leak-free water connection, replace the old or damaged showerhead rubber washers.

• Reassemble your cleaned showerhead and affix it to the hose.

• To remove any last bits of dust from the showerhead, switch the water supply back on.

You can quickly fix a dripping shower and save money and water by following these instructions. To limit wastage and stop future damage, a dripping shower must be fixed right away. I hope you got an idea of how to repair a dripping shower head.