How to Fix Broken Tile?

I like to refer to a cracked tile as a tiny earthquake in our home's decor. I had a lot of cracked tiles in a particular area of my house because my heavy dressing table fell on the tiles. But I fixed the tiles with my DIY spirit and a few tools and tactics. If you want to know

how to repair broken tiles, I can help you out.

Whether you're a DIY enthusiast or just a newbie, my method will surely help you.

How to Fix Cracked Tile?

• Assess the Damage:

  The first thing you need to learn about

  how do you fix a cracked tile, is to assess the damage to the tiles.

  Small cracks can be filled, while large chips or missing pieces might require replacing the entire tile. 

• Choose Your Tool:

  If there are hairline cracks, epoxy resin can be your magical potion. Use it to fill the crack, smoothen it out, and watch the gap vanish. But if there are larger breaks or missing pieces, grab your replacement tile, tile adhesive, and a sturdy cutter. 

• Fix it:

  Now follow these steps on

  how to fix the broken tiles.

• Clean and dry the damaged area thoroughly. 

• Apply the epoxy according to the instructions, filling the crack and smoothing it with a craft stick. 

• Score the edges of the old tile with the cutter for easier removal. Pry it out gently, then spread the adhesive on the exposed surface. Position the new tile firmly, press, and let it cure.

And voila! With these tips on

how to repair cracked tile

and a bit of DIY spirit, you'll be repairing those broken tiles like a pro.

I watched a YouTube video about how to fix broken tiles on floor and implemented all the steps carefully. Trust me it was very helpful. It is always better to do it yourself rather than asking an expert’s aid or spending a huge sum of money. Let me share what steps I followed to repair the tile here.

How to fix a broken tile without replacing it?

Here are the steps that you need to follow to fix your tile-

Examine the broken tile to determine the extent of the damage. If it's a minor crack or chip, you do not need to put much effort.

Before you begin the repair process, gather some materials: epoxy adhesive, matching paint or markers, cleaning solution, a putty knife, fine-grit sandpaper, and a soft cloth.

Thoroughly clean the broken tile and the surrounding area. Use a cleaning solution to remove any dirt, grime, or debris. Ensure the surface is dry before proceeding.

Then use a fine-grit sandpaper to smooth the edges of the broken tile. This will help create a better surface for the adhesive to bond with.

Follow the instructions provided with the epoxy adhesive to mix it properly. Usually, it involves combining two components to activate the adhesive.

Using a putty knife or a small spatula, apply a thin layer of epoxy adhesive to the back of the broken tile. Make sure to spread it evenly across the entire surface.

Next carefully position the broken tile back in its original spot and press it firmly onto the adhesive. You can use a clean cloth or a rubber mallet to ensure it is properly seated and level with the surrounding tiles.

Once you

fix broken floor tile, wipe away any excess adhesive that may have squeezed out from the sides of the tile using a damp cloth or sponge. Be cautious and try not to disturb the position of the tile.

Follow the manufacturer's instructions to determine the curing time for the epoxy adhesive. It typically takes a few hours to set, but it's recommended to leave it undisturbed overnight for best results.

If necessary, use matching paint or markers specifically designed for tiles to camouflage the repaired area. Apply a thin layer of paint or carefully colour in the crack or chip to blend it with the surrounding tile.

Once the repair is complete and the adhesive has fully cured, clean the tile surface gently using a soft cloth and a mild cleaning solution. You should always avoid using abrasive cleaners that could damage the tile.

So this is how you do the broken floor tile repair. But if the tile is completely broken and you see you won’t be able to make it look new, seek an expert’s aid. I hope this was helpful. If you have more tips on how to fix broken tile, please share them here.