How to Fix Fuse in House?

For the last few weeks, there have been a lot of electricity fluctuations in my area. Due to this, the fuse at my house blew out. I wasn't aware of the steps for replacing a fuse. I called my brother and asked him how do I fix a blown fuse. He told me that to replace a fuse, I needed a new fuse, and luckily, I had a spare fuse at my house.

How To Fix Fuses In A House?

Here is the step-by-step method he told me. 

• He told me that the first thing I needed to do was turn off all the electric devices in the affected area. According to him, this reduces the chances of overloading the new fuse.

• After that, he asked me to turn off the power switch of the fuse box. He also explained when it comes to how to fix blown fuse, turning off the main fuse box is important as it would stop the power of the whole house. 

• Now, the next thing that he told me was to locate the blown fuse. To make the process easier for me, he told me that I needed to look for a fuse that had melted or was discoloured. 

• Following that, I was asked to remove the blown fuse and replace it with the new fuse. 

• After that, he told me to restore the power and check if all the rooms had power or not. 

And that’s how do I fix a blown fuse he told me. I hope this helps. 

1. Locate your fuse box: Most homes have a fuse box located near the electrical meter, typically in a basement, utility room, or garage.
2. Identify the blown fuse: Fuses are typically glass or plastic tubes that contain a wire filament. If the filament is broken, the fuse is blown. You can check the fuses by turning off the power to the circuit, then removing the fuse to inspect it.
3. Replace the blown fuse: Make sure to replace the fuse with a fuse of the same amperage. You can purchase fuses from hardware stores or online.
4. Turn the power back on: After the new fuse has been installed, turn the power back on and test the circuit to ensure it is working properly.
5. Call an electrician: If the problem persists after replacing the fuse, or if you are not comfortable working with electrical systems, it's best to call a licensed electrician to help diagnose and repair the issue.

With the correct equipment, information, and safety procedures, fixing a blown fuse in your home is a straightforward DIY task that may be readily accomplished. Trust me, I have tried and well, succeeded too ;)

I’ll show you how to turn the power back on, from guiding you in finding your electrical box to determining whether you have fuses or circuit breakers to the fundamentals of safety and how to fix fuse in house.

What does a blown fuse or a tripped circuit look like?

Fuse sockets are circular and fit into them while circuit breakers resemble switches. Glass windows with metal wires inside can be found on fuses. A blown fuse may have burn marks on the glass, be filled with melted metal, or have discoloured glass.

Because the switch will be in the flipped position, a tripped circuit is somewhat simpler to spot. Find the switch that has flipped to the middle, between the on and off positions, by inspecting the switches.

How to repair fuse at home? 

There are a few procedures to do after finding your blown fuse in order to replace it and turn the power back on. A flashlight and a replacement fuse with the exact same size, amperage rating, and type as the blown one are required for this task.

Bring the blown fuse to a hardware store so they may be matched if you are unsure that you have the correct fuse. Having an exact match is crucial since utilising one with a higher amperage can harm your home's wiring as well as any connected appliances. 

So, if you have a fuse blown in house how to fix it? Follow the steps here.

1. To stop the flow of electricity to the fuse box, turn off the main power.

2. Find the room where the outage happened, hopefully, it was noted beforehand.

3. Check the circuits and fuses.

4. Replace the blown fuse with a new one by unscrewing the old one.

5. The tripped circuit should be switched from the centre position to the off position for circuits, and then back to the on position.

6. Reconnect the main power.

Test the lights in the room that lost power once the fuse or circuit breaker has been replaced. Try using just one or two appliances at once; if you use too many at once, the fuse will be overloaded and you'll have another blown fuse. If you've tried these solutions and the blown fuse still won't reset, you might want to get assistance from a qualified specialist.

Now you very clearly understand how to fix fuse in house.