How to fix shower tray?

Hello Hemant. I noticed that the shower tray in our bathroom had developed cracks. So, I called a plumber to look into the issue. I saw how to fix a cracked shower tray by following the steps that the plumber was performing. He told me that first cleaning is done, then sandpaper is used to sand, followed by applying a filler. I’ll describe the complete process below.

How to Fix a Crack in a Shower tray?

Here is how you can fix a crack in your shower tray:

1. This process works for small chips and hairline cracks. So, first analyse the crack. If it is large, you should consult a professional.

2. Clean the cracked region using isopropyl alcohol to remove soap scum, grease or residue. 

3. Take a fine-grit sandpaper to lightly sand the region around the crack. 

4. Grab epoxy resin or filler. Take a putty knife or spatula and carefully apply the repair material. Follow the manufacturer’s guidelines to apply the product.

5. Smoothen the repair material to level with the surrounding surface.

6. Let the repaired region cure as per the product’s guidelines.  This can take a few hours, so don’t be restless.

7. After the repair has fully cured, take a fine-grit sandpaper and smooth the

   surface. Wipe away any dust using a clean cloth.

8. You can choose to paint or seal if needed.

I believe you now understand how to fix a leaking shower tray. Have a good day.

The shower tray is an essential component of the shower. It's critical to choose one that's well-made and will last for a long time, but the tray's quality won't matter if it's placed incorrectly. The difference between proper functioning and pricey leaks can be determined by how well a shower tray is installed. Don't worry, we've got you covered in our shower tray installation guide below. Let’s see how to fix a shower tray India.

How to fix acrylic shower tray India?

• Place the shower tray where you want it to go and double-check that there are no height difficulties. Adjust the height of the tray by screwing the legs into place and adjusting the height until it is at the right levels. Then you have to attach the waste outlet to the tray to ensure that everything matches up correctly.

• You can adjust the riser legs to provide enough fall for the waste to drain away, which is normally 50mm per metre of pipes. It may be easier to level the tray at first by adjusting the critical corner legs. Remember to include the centre leg.

• Determine the optimal way from the waste trap in the tray to the waste pipe. Connect your output pipe to the trap if it already exists.

• Insert the tray, having pre-fitted the garbage to the pipes at the bottom.

• Use a glass level to make sure the tray is perfectly level all the way around. There is no need to tilt the tray because it is designed to direct the water towards the trash outflow.

• You should verify that all of the legs are linked and that the lock nuts are adjusted and in contact with the socket.

• Then you should fill a mug or bottle with water and pour it down the shower drain to ensure that there are no drips or leaks.

• You must use baseboards or shower tray side panels to fill in the gaps around the tray's edges. This will help you with how to fix shower tray.

• Apply a layer of sealant behind the tray, between the wall and the tray, to soften the tray and serve as a primary leak seal. Using a bead of sealant, run it down the top edge and the wall.

• Arrange the tiles on the tray, allowing a 3mm gap between them. Apply a layer of sealant to the gap between the tile and the tray's bottom. This is a crucial secondary seal.

• Measure the length of the side panels. Before you offer up the panel, make sure the leg hooks are in place. To secure the panel, you may choose to use panels on the floor.

How to fix a cracked shower tray?

You can start by cleaning your shower tray first. Then examine where the crack or leakage is exactly. Then you have to clean the tray properly and apply sealant or patch on the crack. Let it dry for a day. After the filler has dried, sand away any excess build-up. Clean away the dust and use a finishing polish to make the restored area appear in with the rest of your shower tray.

I think you understood how to fix a shower tray India.