Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Fix the Blinds on Windows?

view 263 Views

2 Answers

3 Year

Comment

whatsapp [#222222128] Created with Sketch. Send
0 2023-11-17T09:32:56+00:00

In my house, I have two pets. They had, quite unintentionally, opened the closed blinds to have a peek outdoors last week. As a result, my blinds cracked and thus I googled how to fix blinds for windows and discovered five simple procedures. These include taking out plugs, tugging on a string, and removing and replacing the broken slats with new ones. For your reference, I have included a thorough process for fixing the blinds below.

How to Attach Blinds to a Window?

I have followed the methods listed below to cover my house windows with blinds. It is surprisingly inexpensive and quite simple to install on the window. 

  • I started by removing the pair of plugs that were available at the bottom of my blind with a flathead screwdriver. It basically keeps and hides the lift strings or the thicker center string.

  • I loosened the knot by pulling the string through the opening. Then, I took the lift string off.

  • I then removed the broken slat and replaced it with the new one. I made sure the lift string went through the slats in the same direction when I rethread it.

  • I pulled the string through the base once more and knotted off each side to ensure that they were equal in length.

  • I replaced the plugs and tightened them with a hammer or rubber mallet.

  • Finally, I hung the blinds smoothly to the rail.

I was able to simply fix the majority of typical window blind issues and resume enjoying their benefits by following the above steps. I hope you found this answer on how to fix blinds on windows helpful.

Hire NoBroker carpenter to fix blinds on windows. Read more -

How to Cover Window Glass for Privacy?

0 2021-12-28T18:02:42+00:00

Hello,

I use window blinds to maintain privacy and filter natural light. One time a slat on the vertical blind broke because my nephews were grabbing it too tightly. That’s when I called the NoBroker Home Service Professionals to get it fixed.

How to fix a broken slat on a vertical blind:
  • At the ripped-off slat’s top, you’ll find a slot that goes in a clip for fastening it to the headrail.

  • Just flip the blind upside down and make a hole through the other end.

  • After that, hang it back up.

  • A paperclip or sturdy tape can also be used to fix the broken slot and put the blind back into the headrail.

This is the process you can follow to fix a broken slat on a vertical blind. Can you explain What kind of issue you’re facing? Does your window blind have a broken lift cord? Or are you dealing with jammed vertical blinds?

Check Out NoBroker’s Home Services and Let Professional Carpenters Fix Your Window Blinds

Most Viewed Questions

Recently Published Questions

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners