How to Fix Tiles on Wall?

I wanted to make a statement wall in my bedroom with tiles. But I did not want to waste an entire bag of cement for it. So I wanted to know how to fix tiles on wall without cement. I used grout to fix tiles on the wall without cement. But I must say that the tiles that are fixed with the help of cement are way more sturdy and strong.

I will explain both with cement and without cement methods to you. You can choose whichever method suits your needs the best.

How to Fix Wall Tiles with Cement?

This traditional method offers rock-solid strength and long-lasting adhesion. 

1. The first step is to clean the wall and roughen the surface for better grip. 

2. Then follow the right ratios of cement, sand, and water for a smooth, workable mix. 

3. After that, apply the mortar to the back of the tile and the wall with a trowel. 

4. Press the tile firmly onto the wall, aligning it perfectly. You can also use spacers for even gaps if needed.

5. Then once the tiles are set, fill the gaps with grout to create a watertight seal and a polished finish.

How to Fix Bathroom Tile Wall with Grout?

For smaller tiles or quick fixes, grout can be your DIY weapon of choice. It's easier to use and dries faster than cement, but might not be as strong for heavy tiles.

1. Similar to the cement method, ensure the wall and tiles are clean and dry.

2. Then follow the instructions on the grout package to mix the right consistency. 

3. Use a grout float to spread the grout over the tiles, filling all the gaps evenly. 

4. Now remove excess grout with a damp sponge, leaving the grout in the gaps to set. 

5. For extra protection and shine, apply a grout sealer after the grout dries. 

I hope now you understand how to fix tiles on wall without cement.

Hi, Buddy

Tiles may be used almost anyplace as a floor or wall covering, but they are particularly beneficial in bathrooms and kitchens. Do you want to know how to fix tiles on wall? Let me tell you something that tiled walls are good for humid bathrooms and kitchens where they will be exposed to culinary splatters since they can withstand moisture and can be cleaned better than drywall or other materials.

Following are the methods of how to fix tiles on bathroom wall or for that matter any wall.

• Make sure your wall is ready to go before you begin with fixing wall tiles

You'll want to verify the base layer that you'll be constructing on to make sure it's structurally solid after you've removed the current wall dressings and wall items, such as light switch covers. Because a rotting or weak wall might cause your tiling job to bend, crack, or even shatter and fall down, this is critical.

• To determine the location of your tiles, use a level and a tape measure

Measure and mark the middle lines in the area you'll be tiling with a level and measuring tape.

• You'll need to locate both the vertical and horizontal middles

 as they will be used to keep your tiles straight and divide the space into tiling parts.

• Using a chalk line

mark the areas on the wall. Mark the midline and vertical lines you just measured with a chalk snap line

• Using a diamond wet saw, dry fit and then cut tiles to size

 To ensure that your tiles will appear the way you want them to, dry fit them first. When it comes to the corners and edges of your wall, you'll probably just need a portion of a tile, therefore you'll have to chop the tiles down to size with a diamond-tipped wet saw.

• To keep your first row straight, use a batten

After you've completed all of the other steps, you'll need to install a batten to assist keep your tile rows straight.

• Toss the mortar together

To lay your tiles, you'll need thin set mortar

• Distribute the mortar

To apply the mortar, work in a 2x3'[6] area with a tiling trowel

• Assemble your tiles and hang them on the wall

You can begin laying your tiles now that the mortar is ready

Grout should be chosen and mixed. Depending on the size of the spaces between your tiles, you'll need to decide which grout is best for your project.

• Using a grout float, spread the grout

Spread the grout in a 3x3' area (or whatever size you can grout in about 20 minutes) using a grout float.

• Make sure the grout is clean

Allow for 20 minutes for the grout to set before wiping the tiles with a clean, damp sponge to remove any excess grout.

• Allow time for it to cure

 Allow the grout to cure for three hours, or for the time specified on your product's instructions. Ensure that the area is kept dry and that appropriate ventilation is provided.

• Grout should be sealed

You'll want to use a grout sealer after you've finished installing all of your tiles. This will help prevent mould from forming in the cracks, and it will need to be sprayed on a yearly basis.

I hope this answer would help you in learning how to fix tiles on wall.

Read More: