How to fix water leak in bathtub ?

To solve a problem it’s very necessary to understand the cause of the problem. A water leak in the bathtub can occur in either the faucet drip or the underlying pipes. There are other areas as well, where the leak might occur. But, the main question is how to fix a dripping bathtub faucet.

To fix this you need to call a plumber as they have to replace the shower diverter.

Here you can learn about how to detect the areas the water is leaking from.

How to Fix Water Leak in Bathtub Faucet?

You can follow the below steps to get that done:

• Identify the leakage and shut off the water. 

• Use a screwdriver to remove the faucet. Do it slowly. 

• Inspect if the faucet is damaged or not. If it is then, replace it. 

• Install the new faucet and check if the issue still persists. If it does then get in touch with a plumber. 

The above steps you can follow to fix water leak in bathtub shower.

To locate the water leak in bathtub faucet you can check if there is any water spillage in the area around it. 

To inspect if the water is leaking from the bathtub, you can just wipe it outside with a cloth. Now fill the bathtub with water and spread newspaper around the area you just cleaned. Look for the place where the newspaper gets wet to locate the leakage. 

To check the drain, you can fill the bathtub and wait for some time to see if the water decreases or not. If it does, then it means that the drainage area isn’t fully sealed. Your bathtub shower can leak as well, the reason behind that would be a corroded or cracked shower diverter. 

Hopefully, you have found your answer about how to fix a dripping bathtub faucet. 

. 

Hey, 

If you see a bathtub leaking, your first instinct would be to call a plumber. The plumber will then make a huge bill and you will have to spend a lot of cash on the repair. Friend, this doesn’t have to be true. You can easily fit a small leak on your own. It will save you time and cash. Keep reading to know the entire process right here.

 Here is the process to fix a leaking tub :

• Switch off the water supply to the washroom. This will prevent water wastage. 

• Open the bathtub valves to drain extra water stored in the tub system. 

• With the help of tools like a handle puller, open the handle screws.

• With a socket wrench open the escutcheon and entire stem assembly.

• Take out the old seat with a seat wrench and replace it with a new one. 

• Replace all faucet stem assembly parts with new parts. 

• Screw the packing nuts with a small flat-blade screwdriver.

• Slide in a bonnet washer with grease. 

• Apply the pipe joint compound and place it in the body of the faucet. 

• Lastly, put the new escutcheon and handle along with greased handle splines.

You will need a few tools when you learn how to repair a leaking bathtub. I would recommend getting a wrench, valve, rubber washer, gasket, screwdriver, gloves, sealant, etc. 

This is all from my end on the bathtub leaking. I hope your problem has been solved. 

.

Read more :