How to flush hot water heater?

I suggest you clean the water heater frequently. This can assist you in maintaining your water heater in prime condition for many coming years. It can also save you from an unexpected emergency that necessitates calling a nearby plumber. I am here to guide you on how to flush hot water heater.

How to flush your hot water heater?

1) Disconnect the gas or electricity

Set the gas line to the "off" state if your water heater runs on gas. At the gas shutdown button, you might also turn the gas off for the appliance. This will help you with how to flush a gas hot water heater.

If your water heater is electric, shut off the power at the power switch. This will help you with how to flush electric hot water heater.

2) Turn off the water

Cut off the water supply to your water heater. Before you flush, it is crucial to allow the water inside of the water heater to cool completely because it can stay boiling hot for a lengthy time.

3) Turn on a valve

You need to turn on a hot water valve. A tub valve most probably has your home's maximum rate of flow if you wish to empty your water heater more quickly. ‍

4) Attach a pipe to the drain valve

You'll need a pipe for this process, which you'll attach to the water heater's drain valve. The pipe will then be connected to drainage, either inside or outside your home.

5) Open the drain valve ‍

Release your water heater's flow control valve and permit the container to entirely empty once your pipe is connected and placed outdoors or to a drain pipe. This is one of the main methods in how to remove water from water heater.

6) Restart the water supply and flush ‍

You must clean the water heater with fresh water from the chilled water valve in order to dissolve the blockage in the bottom of the tank. When water flows freely through the end of the pipe, your water heater has been completely cleaned. ‍

7) Refill the tank

Disconnect the pipe and close the flow control valve. Then, let the container fill up while the cold water supply remains on. When water starts to flow from the open hot water tap, you understand the container is full.

8) Restart the water heater

You must restart the hot water heater once you are done with all the procedures.

You must have understood how to flush hot water heater.