How to install multiple pendant lights?

Hey there. If you wish to learn how to install multiple pendant lights one junction box, you can visit Kajol’s answer. He has given a detailed explanation of the subject. Through this answer, I would like to throw light on connecting multiple pendant lights. So, if you want to know the method, continue to read.

How to Wire Multiple Pendant Lights Together?

Here, I have taken an example of 2 pendant lights, which we’ll fix to a single light point. Let me share the process to do so.

1. To connect two lights to one light point, you will require two wire connectors. Start by opening the connectors by raising the orange flaps upwards. 

2. After this, take the stripped cords and disconnect the brown and blue cables. 

3. Now, put all the brown wires in one wire connector, and all the blue wires in the other wire connector.

4. Then, close the orange flaps on the wire terminals.

5. Do this process for the wires from the lights and the wires coming out from the ceiling. 

6. Now, switch on the power and the lights should work. 

This is how to install multi pendant lights together. I hope my answer helps you learn the process. 

I have recently installed multiple pendant lights at my home with the help of my dad. I must say they really added style and personality to my space. Replacing old light fixtures with pendant lights is a basic home improvement project. Let me tell you how to install multiple pendant lights.

• You should hang pendant lights from 12-20 inches down for an 8 ft. ceiling height. Add three inches for every additional foot of ceiling height.

• For every pendant light that will hang over countertops or tables, measure up 30-36 inches.

Now let me tell you how to install pendant lights in a finished ceiling.

• Remove the components and fixture from the box.

• Turn the main power off.

• Take down the old lighting by removing the fixture and the old wire connectors

• Disconnect the wires, remove the base, and trim pieces.

• Please ensure there’s a beam or support piece for holding the fixture securely.

• Tighten the screws in the electrical box.

• Connect the wires from the fixture’s back to the wires hanging out of the junction box. You can use some wire strippers to remove some wire insulation for exposing connections. Wrap wire ends together. You’ll be required some help holding the light in place.

• Screw wire nuts & secure them.

• Attach the ground wire. For this, you will have to wrap it around the ground screw in the junction box.

• Push the wires into the junction box.

• Installing the mounting bracket & screws will be the next step.

• After that, screw the fixture to the bracket.

• Install a light bulb, trim, cover, glass globe, and all other parts.

• Turn the power on.

Now you have have gotten an idea on how to install pendant light in recessed light.

Read more:

I hope you liked my answer on how to install multiple pendant lights.