How to Paint Bathroom Tiles?

One day, I noticed my bathroom tiles were looking old and dull. I planned to get it painted and give it a fresh look, hence researched how to paint bathroom tiles. I came across an easy method and found that before starting the process I needed some necessary tools like tile paint, brushes, plastic sheets, and so on. I have shared the step-by-step process below.

Tools Needed for Painting Bathroom Tiles

Here is a list of items I found for painting bathroom wall tiles:

• Tile paint and primer

• Painter's tape

• Paintbrushes

• Sandpaper

• Cleaning supplies (vacuum, mop, and mild detergent)

• Drop clothes or plastic sheeting

How to Paint Bathroom Floor Tile?

• You must start by cleaning tiles using a vacuum and then mop the floor with a mild detergent.

• Lightly sand the surface of the tiles to help the paint stick better.

• Wipe away any dust with a damp cloth and let the tiles dry.

• Use a brush or roller to apply a layer of primer made for tiles. Allow the primer to dry according to the manufacturer's instructions.

• Use painter's tape to cover areas you don’t want to paint, like grout lines or nearby surfaces. Now, protect the surroundings with plastic sheeting.

• Use a brush to apply your tile paint and let the paint dry completely.

I found the steps quite complex, so I finally hired a professional from NoBroker. They refreshed the look of my bathroom and made my tiles look brand new. I hope this gives you a clear idea of how to paint bathroom tiles in a shower.

I recently renovated my bathroom and got tiles installed. So, I was looking for how do you paint bathroom tiles and found a simple process. The result turned out good and I am here to share the same process with you.

How do I Paint Bathroom Tiles?

Before painting the tile, you need to prepare them for the job. So, I’ll share the complete steps from the starting point.

1. Begin by cleaning the tiles. Use a mixture of warm water and trisodium phosphate. Then, rinse the tiles with clean water and let them dry.

2. If there are any chipped or broken tiles, repair them using a caulk and putty knife for the small cracks. For the bigger ones, use waterproof spackles.

3. Sand the tile with 120 grit sandpaper. Rinse the area and dry the tiles.

4. Now, you need to apply a couple of layers of primer. Check the manufacturer’s guidelines to know the wait time between the two coats.

5. After the primer has dried, add an epoxy paint to a paint tray.

6. Paint the tiles using a roller. Apply a light layer of the paint. For touch ups, use paintbrushes.

7. Apply 2-3 coats of the paint and let the paint dry between each coat.

8. Finally, apply a layer of polyurethane sealer to keep your tiles protected.

This is how to repaint bathroom tiles. I hope this will help you.