How to Paint Gypsum False Ceiling

Hi, Like you I was also interested to know how to paint gypsum false ceiling. I have a gypsum false ceiling in my home and as Diwali is coming, I decided to get it painted. I hence researched it, and found that it might seem like a bit of a process but with the right steps, you can do it by yourself. All I need to do is prepare using sandpaper, priming the surface and painting with good-quality paint. I have shared the process below.

Steps to Paint Gypsum False Ceiling

I found that sometimes false ceilings come with joint putty. If your false ceiling doesn’t have, then you have to use a fiberglass on the seams and layer with a jointing compound before preparing the surface with a coat putty.

I came across the following process for painting gypsum ceiling:

Preparation

• You need to use sandpaper and sand gently on the dried joint putty surface for smoothness. 

• It’s best to use powdered cement-based putty mixed with water. To hide the seams, you can now apply the putty evenly on the joints. 

• Make sure the joint putty is dry, before you sand the ceiling again.

Priming

• You can use a roller, brush or a spray gun to cover the micro pores of the putty by using a water-based primer and spreading it in even layers to prevent moisture absorption. 

• The primer will seal the surface and help the paint stick better.

Painting

• Select a good quality paint that suits the gypsum ceiling with resistance to fading and molds.

• Start mixing the paint by following the manufacturer’s directions and you should use clean tools before painting. 

• You should put on at least two layers of paint, allowing each coat to dry fully before adding the next.

Maintenance

• Regularly wipe your ceiling with a damp cloth to keep it clean and free from dust, and avoid excessive moisture. 

• Repaint the ceiling immediately, if you see any cracks or peeling. 

I hope you find this information helpful.

Read More: