How to reduce water pressure?

The water pressure of my kitchen tap was too high. Whenever I open the tap to clean my utensils, the water just sprays all over the area. I realised I needed to control the water pressure. I called a plumber and asked him what I should do to solve my problem. He suggested a few ways on how to reduce water pressure in house. I will share what he explained. 

How to Reduce Tap Water Pressure?

I booked a plumber appointment via NoBroker Plumbing Service. The plumber mentioned that he will simply tighten the locking nut. That should help. Here is what he did to control water pressure

• First of all he turned off the water supply to the kitchen tap.

• Next, he used a wrench to tighten the locking nut. He had turned the locking nut counter-clockwise to decrease water pressure. 

• After that, he used a water pressure gauge to check the water pressure. 

• When the pressure seemed to be fine, he turned on the water supply. 

And that’s all it took. I hope this process of how to lower water pressure in house has been of help to you. 

Taking a powerful morning shower may sound like a benefit if you have high water pressure. But the future plumbing issues that may arise are not worth it. Plumbing problems are typically caused by high water pressure, which causes a great deal of pressure on your home's interior pipes. So I thought I must guide you on how to reduce water pressure in house.

How can you reduce water pressure in the house?

• Slowly turn the valve to the off position after locating the water main.

• A locking nut and screw or bolt mechanism will be used on the regulator. Turn the screw with a screwdriver anticlockwise (to the left) or clockwise (to the right) in quarter-turn intervals after loosening the locking nut with a wrench to change the water pressure.

• Return to the water pressure gauge and run the system through another test (remember: keep pressure between 40 and 60 PSI).

• When the desired pressure is reached, use a wrench to tighten the regulator's lock nut in order to prevent the adjustment screw from moving.

• Return the main water valve to the water main and slowly turn it on. You might want to run a tap for a short while to remove any air from the system.

What is the ideal water pressure in the house?

Get to the bottom of the problem as soon as you can to prevent further harm to your house if your water pressure is higher than the advised 80 psi. The location of your residence is typically the reason for high water pressure. This problem can naturally arise if you reside at the foot of a hill. Higher-than-average water pressure can also be brought on by hot weather and variations in your water heater's output volume.

Using a pressure regulating valve, or PRV, is the best approach to lowering the water pressure in a house. A PRV is directly attached to your pipe. It can be installed by a qualified technician, after which you can easily adjust the water pressure in your plumbing to the proper psi.

Your doubt about how to reduce water pressure must be clear now.