How to remove acid stains from marble floor?

Our pooja room has marble flooring and just a few months ago I noticed stains on the floor. I decided to hire expert cleaners but later decided to try cleaning them myself. I went to buy a marble acid stain remover, but it contained chemicals. I had a fear that it would damage the floor so I called my mother to ask her about some home remedies. I got to learn about a few solutions and how to clean acid stains from marble, and that was really helpful. You can also implement them and remove the stains forever.

How to remove acid marks from marble?

Here is how you can remove acid marks from the marble:

Wear gloves and eye protection to safeguard yourself from any potentially harmful cleaning agents.

If the acid stain is recent and still active (e.g., from spilled lemon juice or vinegar), immediately neutralise the acid by sprinkling baking soda or an alkaline marble cleaner over the affected area. Allow it to sit for a few minutes to neutralise the acid.

For older or dried acid stains, avoid using harsh or acidic cleaners. Instead, opt for a mild, pH-neutral cleaning solution. Mix a few drops of mild dish soap with warm water in a bucket.

Dip a soft cloth or sponge into the cleaning solution and gently clean the stained area. Avoid using abrasive scrubbers or harsh tools that may scratch the marble.

After cleaning, rinse the area thoroughly with clean water to remove any residue from the cleaning solution.

Use a clean, dry, and soft towel to pat the marble surface dry. Avoid air-drying, as this may leave water spots.

If you have marble acid stain remover at home, use that, but if you do not, use a lemon juice and vinegar solution.

Ample solutions on how to remove acid stains on marble floor have already been provided by the other commentators. However, for me, using baking soda, ammonia and water solutions seems to be the most effective. I am therefore going to share with you my cleaning process.

How to Remove Acid Stains from Marble Tiles?

Here is a step-by-step process on how to remove acid stains from white marble floor:

• Prepare the Cleaning Solution: Mix 2 tablespoons of baking soda, 1 tablespoon of ammonia, and 2 cups of water in a spray bottle. Shake it well to ensure all ingredients have blended.

• Apply the Solution: Spray the mixture generously over the acid-stained area of the marble floor and make sure that the stained area is completely covered with the solution.

• Let it Sit: Allow the solution to sit on the stain for about 5-10 minutes. This will allow the baking soda and ammonia to neutralise the acid and lift the stain from the marble.

• Gently Scrub: Using a soft cloth or sponge, gently scrub the stained area in a circular motion. Do not use abrasive materials to prevent scratching the marble surface.

• Rinse and Dry: Wipe the area clean with a damp cloth to remove any residue and dry the marble thoroughly with a clean, dry cloth to prevent water spots.

Your marble floor will look all new and shiny. 

Read More:

Tackling acid stains on my white marble floor during a DIY cleaning became a pressing concern, driving me to seek effective solutions. I realised I had to ask for external help to clean up the mess that I created. I came across the NoBroker cleaning service and asked them  how to remove acid stains from white marble floor. They said, I could rely on their professionals for that and just sit back to see the magic unfold.

How to Remove Acid Stains on Marble Floor with NoBroker Cleaners:

• I visited the NoBroker Website and clicked on cleaning services offered by NoBroker.

• Next, I just chose my location and checked the services they offered.

• I browsed through the cleaning packages offered and selected one-time deep cleaning 

• After entering my details, I got a call from the relationship manager to further understand my requirements and he shared the quote with me post that. 

• On the selected date and time, the team came up and finally put an end to my woes.

Seeking a professional touch for how to remove acid etch marks from marble was the best call. My decision was driven by their reputation for reliable services and a commitment to quality. The experience of hiring through NoBroker was seamless, and the results exceeded expectations.

Read More:

A few years back I bought a local cleaning solution to clean our marble floor and it totally damaged the area when I poured the solution. I felt so sad hence started searching how to remove acid stain on marble at home. I came across a lot of answers but let me share the ones that I have personally implemented. These methods won’t damage the marble for sure so you can go for them without second thoughts.

How to clean acid stains from marble?

There are a lot of ways to clean stains on marble floors like

• Baking soda, ammonia and water solution to clean the stain

• Dish soap and water solution

• Shaving cream, toothpaste, perfumes and mouthwash 

However please note that none of the above-mentioned materials must be let to sit on the stain or marble for a long time. Every product has a side effect of its own hence try to just rub the stain with these solutions or products instantly without any delay. Also remember using acid on the marble floor is sure to damage it. Many people use acid on tiles and hence believe using them on marble is going to be equally effective but NO. The acid reacts with marble vigorously and damages the area completely hence should be avoided at any cost.

This is all I can say on how to remove acid stain from marble at home.

You can go for market-bought products but use them as per instruction on a smaller surface first. Experiment with them and then go for using them. Overall I will say removing the acid stain on marble is not that hard and I hope the above-mentioned methods will be enough.

I had gotten beautiful marble flooring installed in my living room in the past month. It elevated the entire look of my home. One day, my 5-year-old was running around and ended up spilling fruit juice and paint on the floor. There, began my quest to find the best marble stain removal product. I will share my tips below. 

Maintaining marble is tricky as the floor tends to stain easily. A stain can develop from acidic spills, fruit juice, wine, vomit and urine etc. 

There are professional marble cleaning products available online. You can buy one of these chemical-free products and apply it directly to the acid stain. 

This is one of the most popular hacks as it shows instant results. You will see people pouring baking soda on marble and fabric stains.

You can get 10% diluted ammonia to neutralise the acid stain. Pour the solution and let it rest for 10-15 minutes. Then, rinse the marble with room temperature water. 

Take any regular detergent available in your house and pour it on the stain. You will then have to carefully scrub the stained area with a toothbrush or microfibre cloth. If needed, dilute the detergent with water.

You can buy a commercial marble restoration kit or marble etching kit online. The kit will have steps listed to clean the marble stain.

You can use a drill machine with a low-speed setting to burnish and polish the stain out of the marble surface. Be careful with the drill machine as high-speed settings can damage the flooring.

I hope your doubts about marble stain removal have been cleared. 

Read more :

• For powder, pour some water first on the stain and then a little amount of powder and let it moisten the stain. Rub the area with a clean cloth and hope it worked.
• You can use several polishing or cleansing products available in the market like Harpic-White and shine, GoMarb for marbles and granite, Hard Stain Spray but be sure that you use a little amount at first or it may erode the area as well.
• If all these fail, you need to hire expert cleaners to do the task.

• Wear gloves before you use the mixture of baking soda and water or ammonia
• Don’t scrub the area very hard. It will not only damage the area but will also make you tired soon
• Keep doors and windows open as the emission from such mixtures can affect you
• Be sure that the mixture does not go in your eyes

• If the acid stain is fresh, sprinkle baking soda directly and evenly. It will remove the stain in a few minutes.
• If the acid stain is old, mix baking soda with water to make a thick paste and apply it on the stained area and will it for some time. You'll see that the stains have gone.
• After applying the baking soda trick, clean the area with a clean cloth. Repeat the process if the stains are not removed completely.
• You can also use 10% diluted ammonia, and rub it on the stained area with a cotton pad to see effective results.
• Clean the area with water to remove all the traces of acid or cleaning agents.