How to remove light switch cover?

I believe you should inspect and change light switch covers before they wear out completely. Because if you don’t look out for the damages or cracks in the cover, it can lead to electricity bleeding and life risk. Let’s see how to remove light switch cover without screws.

How to remove light switch cover plate?

1) Examine the Plate Covers

You can begin by walking around the home and inspecting all of the light switch panel covers. Do the cables or switch plate show through, or do they fit tightly within the slot? If you want to prevent the risk of fire or electrical shock, you must change the outside switch panels with noticeable damage.

2) Switch off the electricity

You have to switch off the electricity to the socket before performing any repairs or picking up any equipment. Cut the power to the house if you're dealing with more than one socket. Switch off the circuit breakers that are connected to your circuit breaker.

3) Take Off the Old Plate

You have to remove the old cover plate with a flat head or point screwdriver. If your cover plate has been on the wall for a long time, it may be glued to the wall with paint or wallpapers. When you carefully peel it out, be cautious not to injure the rest of the region.

4) Replace the Cover Plate

Now you can install the new cover plate securely while the breaker is still turned off. You can take a step back before tightening the screws to make sure you're satisfied with the positioning. You may double-check your work with a little level. Tighten the screws when you're done.

5) Check the Connection

Lastly, verify your repair by turning the electricity back through the distribution board. Then give yourself a pat on the back for the good work you have done. And now your replacement work is done completely.

How to remove screwless light switch cover?

If you want to know how to remove light switch cover without screws, read this info. First, you have to loosen the two latches on the light switch's top with a flat screwdriver or another flat instrument. If you want to pull the exterior plate away from the wall, eventually you have to turn the instrument. Now you can take out the exterior cover. Then you have to disassemble the two screws on the top and bottom of the plate to dismantle the internal section. Now you know how to remove light switch cover with no screws.

I hope you understood how to remove light switch cover.