How to Repair a Sliding Window?

When I visited my sister's house last month, I saw that she was using all of her strength to open her sliding glass window. To have it fixed, she called in a carpenter. I asked him to share easy window sliding repair tips. He told me that you could fix it by

. If you are also facing a similar issue, then read on to get detailed steps. 

How to Fix a Sliding Window?

You shouldn't worry if your sliding glass window is difficult to operate or won't stay open by itself. The steps that carpenter suggested can help you easily fix your sliding window. You just need to follow the below procedure:

• Slide the window sash as far as possible after unlocking it. 

• Now, grip the window tightly on both sides and raise it to remove it from the track. 

• Gently pull the top of the window out from the frame while tilting the bottom of the sash in your direction. 

• Place it on a stable surface.

• Pop the track out by hand by prying it up with a putty knife.

• Use handheld vacuum hose attachments and collect any loose dust or debris.

• Using water and a little dish soap, clean out the tracks and the window frame.

• Make use of a new paper towel and wipe down towards the bottom of the window frame.

• Now, apply silicone lubricant with a spray to the window rollers. 

• Push the track down until it settles back into place. Try lining it up with the bottom of the window frame. 

• After that, push up the sash and place its top back into the frame. 

• Slide the sliding piece's bottom back into the frame and place it on the track.

• Lastly, check out whether your glass window moves smoothly by moving it back and forth.

You can maintain the best possible condition of your sliding glass window for many years to come by simply following these easy steps. Moreover, if sliding window lock repair is required, then avail of the NoBroker carpenter service from the below link.

I hope you found these window sliding repair tips helpful 🙂

Hi, you can do the window sliding repair in many easy ways. For instance, you can check the balance of the windows if they face difficulty in staying up. Also, cleaning the rails is a good way to keep the movement of the windows smooth. I have shared detailed information on this to help you out. I have sliding windows at my home and have dealt with such problems in the past. Hence, I can assist you with the solutions.

How to Fix a Sliding Window?

You haven’t shared any specific problem for which the repair is needed. So, I’ll take two commonly faced problems. So, below, I am sharing some repair solutions for fixing a sliding window.

1. If your sliding windows won’t stay up, there are several things that you can do. One of the reasons that your window doesn’t stay up is that the balance has been damaged or has worn out. For this, you will have to replace the window balance. For a smoother sliding window, you should also clean any debris in between the window. 

2. Another problem that you might be facing is that the window keeps getting stuck. This happens in cases when your window isn’t maintained properly or has become old. The mechanism in the movement of the window usually gets obstructed due to dirt. So, use a cleaning cloth and wipe along the rails. For difficult regions, use a toothbrush. As a more effective solution, I recommend you use a silicon-based lubricant to ease the window movement. 

This is all from my side. I hope this helps.

Hi Buddy,

At my home, I was having trouble opening and closing the sliding window. The most frequent cause of a stuck sliding window is a grimy bottom track. The catch, which fastens the window when it is closed, was likewise ineffective. As a novice at fixing or executing the process of aluminum sliding window repair, I enlisted the help of NoBroker's home service specialists to complete the repair work on my behalf.

• Sliding Sash Removal: 

Remove any security hardware that might be holding a sliding sash in place before attempting to remove it. To remove the window, tilt the bottom out while lifting the sash into the top track. 

• Remove the Track: 

Clean the track with a rag dipped in solvent after vacuuming. Clean up the area until it is completely free of debris. This is one of the most important step that you must follow while understanding how to repair a sliding window. 

• Remove Bottom Roller: 

Try cleaning the bottom roller (or glide) if it isn't rolling. Remove it if it still doesn't work. The roller unit on a wooden sash can be removed by unscrewing it. You might need to first disassemble the bottom rail on some metal units. With the use of a block of wood and a hammer, break the pieces apart.

• Place a New Roller Unit 

Thereafter, tighten the mounting screws after installing a new roller unit. Replace the bottom rail if you had to take the window apart.

• Replace the Window: 

Using a putty knife to gently slide the rollers over the lip of the track can be helpful when restoring the window. Follow these procedures that will help you out with how to repair up/down sliding windows.

Place a piece of hardwood against the bent track and tap it with a hammer to straighten it. If it doesn't work, you can try using pliers, but be careful not to cause a string of tiny kinks as you work.

I would like to conclude here about the process of aluminum sliding window repair. I hope this helps:)

Read More: