How to repair electric kettle?

Whenever I travel with my kid, I carry it so that I can make her rice or boil some eggs for her if needed. After using it for a year, it stopped working. I wanted to get my electric water kettle repaired and called an expert. The electrician detected wiring issues and repaired them. I would suggest finding out the issue first and then taking the necessary steps. I’ve got some tips on how to fix a kettle from my electrician so let me share those here. 

How to Repair a Electric Kettle?

The electrician informed me that a kettle might have a thermostat issue, a broken wire issue or be overfilled. Let me share the reasons why a kettle does not work and the repair processes here:

These are some ways to repair a kettle as per the information I gathered. But I will suggest you seek an expert’s aid in case you have any doubts. Electrical appliances should not be played with so it's better you act safely. 

Read More:

Most of you accept that a common home gadget for swiftly and effectively boiling water is the electric kettle. However, it could develop some problems over time, just like any other device. There are various measures you may take to fix an electric kettle that isn't working properly so that it can be used once again. Let’s check out the easiest tips on how to repair kettle.

How to fix an electric kettle?

• Before beginning any repairs, make sure the kettle is unplugged from the power source. A bad power connection is among the most typical problems that arise with electric kettles. 

• Start by looking for actual problems like any damage, such as cuts or broken wires, on the power cable. It's advisable to replace the cord totally if there are any problems rather than attempting to fix it. 

• If the motor of your electric kettle is burnt or damaged, then replace it with the new one.

• If your kettle doesn’t switch off automatically, then hire a professional to repair the thermostat.

• Mix water and vinegar, boil for an hour, and then give your electric kettle a good clean to avoid the buildup of mineral deposits or limescale. This can enhance the taste and effectiveness of boiling water.

• Once the repair is done, reassemble all the parts of a kettle and test whether it’s working properly or not.

Always put safety first, and if you're unsure about any fixes, get professional advice. Moreover, the above tips help you with how to repair electric kettle not heating.

I use an electric kettle a lot. Once my electric kettle was also not working properly and I could not figure out why is electric kettle not turning on. I called my husband to check it out and he did repair it. There was not much to do. Just look at a few aspects and you can determine whether it can be repaired at home or you need an expert’s guidance. I will be glad to share how to fix electric kettle no power. In our case it could be repaired easily but if you think the repair is beyond your control, please call for an electrician. Do not take any serious step without being pro at it.

An electric might not work for several reasons. Here is a list of things you can do-

Make sure the electric kettle is properly plugged into a functioning power outlet. If it's connected to an extension cord, check that the cord is not damaged and the outlet it's plugged into is working. Plug it on some other point to be sure it is the problem of the kettle or the board.

Some electric kettles have a reset button or switch. Look for it and press or flip it to see if it resolves the issue. Sometimes this is all you need to do, rest the appliance. 

Inspect the power cord for any visible signs of damage, such as cuts, fraying, or exposed wires. If you notice any issues, the cord may need to be replaced at once or you might get electric shock from the damaged part in the future.

If the kettle has been used extensively or there has been a power surge, the kettle's overheating protection may have been activated. Allow the kettle to cool down for some time, and then try turning it on again to see whether the problem persists or not.

Some kettles have a water level sensor that prevents them from turning on if there's not enough water inside. Make sure that the kettle has an adequate amount of water to activate the sensor.

If none of the above steps works, refer to the manufacturer's instructions or contact their customer support for further assistance. They may be able to provide specific troubleshooting steps or advise on repair options. In fact, you must also check the warranty card and let the company take the necessary steps. 

If all these fail, seek an expert electrician’s help. 

I was also wondering why is my kettle not working and my husband figured out that the switchboard was not working properly hence no appliance on that board was turning on. I hope you have understood what aspects to check. This is how you can repair an electric kettle not turning on.

Did you know that the very first household appliance, a kettle, was created several centuries ago, and now, almost everyone owns one. Safer electric kettles have taken the place of conventional gas models. And I think kettles are the best friends of hostel students who can’t control their midnight cravings. It is the kettle which comes to their rescue and in which they can make almost every possible meal. But unfortunately, even the most inventive gadgets with unique designs and extra features like maintaining the water's temperature have flaws and can break. So if your electric kettle not working and you want to know how to repair electric kettle at home, I will be your saviour.

Can electric kettle be repaired?

Yes, it can be. The most obvious things need to be checked before you start disassembling and repairing an electric kettle: 

• Are the kettle's buttons activated, and has the plug been removed from the outlet itself? 

• Does the kettle's power connector twitch when you plug it in? 

Due to the existence of thick scale layers on the heating element's surface, electric kettles can heat water only slowly. The essential objective is to deal with any layers of collected scale, therefore obtain a cleaning agent to remove thick layers of scale. 

How to fix electric kettle?

You might still need to disassemble the electric kettle in order to fix it even if the problem is not your carelessness, haste, or unexpected power interruptions. 

Take off the kettle's base's lid. Then, remove all the screws that are connected to the fixing mechanisms from the kettle's upper section and the base of its handle. Separate the handle from the actual tea jug with care. The plastic rocker can then be discarded. Remove all plastic components. Switch the kettle on. After that, carefully inspect the bimetallic plate's quality and look for any visual flaws. If there aren't any, the cause of the kettle's malfunction is something else different.

It may happen that the cover was not properly closed, which is the most obvious cause of the device's inability to power on. The purpose of carefully closing your lid is to close the steam leak hole. Although blocking the hole is not the most frequent issue, it does happen. The problem is that the hole could be blocked by various calcareous deposits, preventing the steam from reaching the bimetallic plates. Fix the hole, and it will function once more!

The electric kettle's switch occasionally stops working too. It's possible that this issue is related to the circuit breaker on the bimetal plate's side being blocked. It's possible that the plate is merely damaged or that the switch-related pusher is stuck. Unfortunately, it is impossible to fix the electric kettle button on your own. You must get in touch with a specialised service provider in this situation.

So, if your electric kettle not working you know what to do.

When I was all alone in Bangalore, I had to rely on just a few basics. My sustenance was based on an electric kettle, a couple of pans, a petromax, plates and spoons. Please don’t judge it was a short trip. Unfortunately, my electric kettle stopped working and being the khurafati dimaag that I am, I thought of looking up ways for electric kettle repair. Fortunately, I found good hacks and my kettle started working. I can share those with you.

To repair an electric kettle, you’ll have to open the bottom panel. It’s where the heat comes from and most likely the issue lies there.

When you open it up you’ll see that there are a few elements including:

• Electric heater

• Heating element

• LED indicator

• Wires

• Thermostat 

I realized the problem was with the thermostat so I went to the market and got a thermostat which I was sure would fit into my kettle. Now just replace the old thermostat with the new one and check if things go down well.

Well, if you have a warranty, you must just call professional from Prestige and they’ll look after it. If you are out of warranty time then reach out to a professional.

If you are completely new and have no idea about electrical appliances, its best you don’t DIY. You must get it repaired by a professional.