How to Repair LG AC?

A few months ago, I noticed that my LG air conditioner was malfunctioning and not generating cold air as it should have. So I hired an AC Technician to service my air conditioner. I observed the LG AC unit repair procedures he followed to fix my unit. I discovered that he began by

. 

If you are encountering similar problems, there's no need to worry. I have included the detailed methods I learned below for your reference.

How to Repair LG Air Conditioner?

You need to make sure your LG AC unit is on and producing cool air. If it is not operating properly, then follow the below-mentioned tips:

• Verify that your AC unit is correctly connected to a power source if it isn't turning on. 

• Replace the fuse or reset the circuit breaker if the problem continues. 

• You must check the air filters if your AC unit is turning on but not blowing cold air. Filters that are clogged or dirty frequently block airflow, which lowers the unit's cooling ability. You must either clean them or replace them. 

• Lastly, you must check for debris on the evaporator and condenser coils and clean them as necessary.

To prevent additional damage, it is recommended that you seek professional assistance from the below link if you are unable to resolve the issue on your own. I hope you get an idea of how to fix LG Air Conditioner.

Last year's summer was quite brutal in terms of the scorching heat wave. However, the only rescue was my LG AC. Nevertheless, suddenly the AC stopped working. I started panicking. I called LG customer care to help me repair my AC. As this discussion is about the process of LG AC repair, I’d suggest that it is better if you hire a professional who can assist you with the repair process.

As I witnessed the process by which the AC was repaired, I can help you with your query, about how to repair LG AC. The process is as follows;

• Learn the anatomy of your LG Air Conditioner:

The two main parts of an air conditioner servicing system are the evaporator coil, also known as an A-coil, which is located in the plenum of your furnace or air handler, and the condenser, which is located outside your home. The heat from your house is transferred to the outdoor condensing unit by the refrigerant in the A-coil. To remove heat, the condensing unit fan circulates outside air through the condensing coil. The three components that can be changed by a DIYer are the condenser fan motor, the start/run capacitor(s), and the AC contactor. The compressor is likewise housed in the condensing unit, but it can only be changed by a professional. There are no DIY repairable parts on the A-coil.

• Shut down the power:

By removing the electrical cover next to the condensing unit, you can fully remove the disconnect block. Look inside the box with a voltage sniffer to be sure the power is indeed off.

• Clean the Condenser Coils:

An air conditioner condenser can be cleaned quite easily, and doing so on a regular basis will help your unit last longer.

1. To get rid of the gunk accumulation under the lid, direct your garden nozzle upward into the top of the condenser coil.

2. Work your way completely around the coil. After that, flush the trash down the coil fins while aiming the nozzle downward.

3. To flush out any leftover dirt, turn the nozzle to a softer stream and spray water directly into the coils.

• Test the Fuses:

A lot of disconnect blocks have two cartridge fuses inside. Before you start repairs, check them. A malfunctioning component inside the condensing unit is indicated by a blown fuse. Therefore, don't merely replace it and assume the issue has been resolved. Instead, swap out the components, add fresh fuses and start the appliance. Call a professional if it blows again; you have more pressing problems.

• Inspect the Inside of the Access Panel:

The access panel is along the electrical conduit that leads from the house. Remove and store the access-panel retaining screws while the power is off, then take out the panel. Check for mouse nests or signs of chewing on cables and electrical contacts before replacing any components.

Discharge the capacitor first if you discover damaged wires or chewed insulation and you can safely undertake electrical repairs. After that, fix the wires and remove the nest. If not, get a pro.

• Replace the Start/Run Capacitor(s):

At least one capacitor is present in every air conditioning servicing unit. When the compressor and condenser fan starts up, the capacitor stores electricity and releases it to give both motors an extra boost of power. Additionally, it reduces voltage fluctuations to guard against damage to the compressor and condenser fan motor.

Over time, capacitors can slowly deteriorate and provide less initial power. Or, they might instantly fail. Long-term Gradual capacitor failure can cause stress on the motor windings of the compressor and condenser fan, leading to their early failure. Since capacitors are inexpensive, it is sensible to replace them proactively every five years.

• Replace the AC Contactor:

The most typical causes of air conditioning service failures are worn-out AC contactors, which are at the top of the list. Even if your AC contactor is still functional, it is wise to replace it roughly every five years. The old AC contactor must first be unscrewed in order to be removed. Next, transfer the wires to the new device.

I’d like to conclude my discussion here about the process of LG AC repair. I hope this helps:)

Read More: