How to Repair Lloyd Split AC?

I have recently repaired my Lloyd Split AC, so I have an idea of how to repair it. If you are also facing Lloyd AC PCB repair issues, you need to take a few actions that I have shared below to diagnose and fix the problem.

Why Lloyd AC Not Cooling?

Before looking into the steps, investigate the cause of the Lloyd AC not cooling. When my Lloyd AC is not cooling, I came across a few possible causes for inefficient cooling. 

• It can be the result of poor maintenance, including unclean filters or clogged vents that restrict airflow. 

• There could be an inadequate cooling capacity due to a refrigerant leak. 

• Another possibility is that the AC unit is either too big or too small for the area it is intended to cool. 

• The issue can be the result of a broken compressor or thermostat. 

Let’s have a look at the repairing tips below:

Lloyd Inverter AC PCB Repair Tips

• Make sure that the circuit breaker is not tripped and that the AC is connected to the power source correctly.

• Replace blown fuses or reset the circuit breaker if necessary. 

• Check the remote control to see if the power supply appears to be functioning properly. Verify that the batteries are placed correctly and replace them if necessary. 

• Verify if the remote control is sending out signals by putting it to the test with another Lloyd Split AC or by looking for the infrared signal with the camera on your mobile.

• Remove the filters and give them a thorough cleaning with a soft brush if the air conditioner is still not functioning.

• It is best to replace the filters if they are worn out or damaged.

In the case if your Lloyd AC not cooling properly by following the aforementioned tips, it is advised to contact a qualified AC technician for additional fixes. You can hire a professional from the below link:

I don’t think we need to call an AC technician every time our AC fails to blow cold air properly. Sometimes the Lloyd AC repair can be done easily at home as well. Most of the time the dirt in the condensers restricts the free and cold air flow and such things can easily be cleaned at home only. I would hence suggest you try to find out the reason why your Lloyd split AC repair needs to be done and then take any measures. I can share some tips that can help you repair it so read this answer.

So let me share here how to repair Lloyd split AC. At first 

• Switch off the main power before dismantling it

• Cover the unit with a cleaning bag

• Detach the front panel next

• Next task is to unfasten the air filters and wash them clearly

• Now move on to the cooling fins and clear them carefully

• The coils too must be cleaned so don’t forget them’

• Clogged drain lines can also hamper the functioning of the AC so clean them as well

Once you clean all of these, you will see your AC functioning much better. However, if the problem prevails, seek an expert’s aid.

I hope you have got an idea about the Lloyd AC repair process.