How to replace rollers on sliding closet doors?

A few weeks back, I noticed that the sliding closet door rollers were not working properly. It became quite a hassle to open or close the sliding door. To solve this issue, I planned to replace them on my own, but I didn’t know the process. So, I looked up how to replace sliding closet door rollers. At first, I thought the process was tough, but after learning about the steps, it seemed much easier.

How to Replace Sliding Closet Door Track?

Start by removing the door and placing it in such a place that you can remove the rollers with ease. Here’s what you need to do next.

1. Find the screws which are holding the rollers in their place. These screws are ‌above the adjustment screws. You can use a screwdriver to loosen them and remove the rollers. 

2. Remove the screws from their socket and put them in a safe place. Following this, slowly remove the rollers from both sides of the door.

3. Now, take one roller and go to a hardware store to get new rollers of the same type and size. 

4. After that, line them up with the holes in the bottom of the door and install them. Use the screws to secure them in their place. 

That’s it. These are the steps that I followed to replace the sliding closet door rollers. Hope you find these useful.

Hire Expert Carpenters through NoBroker to Repair Your Sliding Closet Door

Read More

How to hire a carpenter?

I have sliding closet doors and unfortunately, one of the rollers broke down. I was too lazy to get it repaired and as a result the other rollers broke as well. So I finally wanted to know how to replace rollers on sliding closet doors. I called the carpenter to do the job and explain a few things to me in detail. I believe I can help you out.

Sliding closet door rollers replacement:

• You have to reduce or extend the right and left sides of the door first to ensure that each of the doors rests even with the wall or any other doors.

• The door level, which is placed on top of the bottom track, can be raised or lowered. This can be accomplished by using a screwdriver to adjust the screw on the bottom rollers.

• If you want to lower the doors, simply turn clockwise, if you want to raise them, simply turn counterclockwise. That's how you modify sliding door height.

How to fix sliding closet door rollers?

1. Before you go anywhere, ensure the adjusters on your sliding closet door are securely fastened clockwise until the lowest level is reached. 

2. You'll have trouble fitting it on the track if you don't do this.

3. And do not be shocked if the door didn't move the first time you install it. Because this is to be assumed, you must first connect the wheels in order to make them easily slide.

4. Ensure the top half of the door is positioned in the door or closet's top frame. After that, position the wheels at the bottom of the track slots.

5. You can now slowly lift the door by turning the screw counter-clockwise, and the wheel will ultimately engage on the track. 

6. You may hear a pleasant sound afterwards, indicating that you can now proceed to the next door and repeat the process.

7. If you hear a scratch or the doors don't slide smoothly, they could be too low or too high, so adjust them till they do.

8. If the top or bottom frames have a large gap, simply adjust the height of the door so that it fits tightly within the frame.

9. Make sure all is in place, including the wheels on the tracks and the door in the frames.

Now you can fix or replace your closet door with this guide about how to replace rollers on sliding closet doors.