How to restore wood patio furniture?

Hi Urvashi. I have a vintage wooden table which is kept outside the house. We use it as a tea table to have our morning and evening snacks. I realised that the table had worn out. So, I searched for how to restore wood patio furniture. I first cleaned the furniture thoroughly, then I moved on to sanding and then using a good quality sealer. I’ll share the detailed steps with you.

How to Refinish Wood Patio Furniture?

Below, you can find the steps to restore your wooden furniture:

• You should start by wiping the surface with a soft bristled dry brush. The furniture goes through a lot because of the weather changes. This will remove dust and any mould or algae on the furniture.

• Now, grab a damp cloth and start wiping the entire surface. You may be required to change clothes depending on the amount of dirt present on the furniture. 

• Invest time in wiping till the cloth comes out clean. No need to use any cleaning products for now.

• Use light-grade sandpaper to sand the furniture. Always sand in the wood grain’s direction. Remain within limits as over sanding can lead to wood damage.

• Your aim should be to smoothen the rough patches and remove the top layer of the discoloured wood.

• Pick an appropriate weather-resistant oil, wood stain or paint. Apply the product.

• After the product dries, you can tighten the bolts and fittings of the furniture to keep the parts in place.

That’s all. I hope this helps you.

Your wooden patio furniture used to be the greatest spot outside the house for a gathering, relaxing, or simply watching your flowers bloom. However, the effects of time, dust, the sun, and rain can degrade the appearance of outdoor wood furniture, causing it to lose its shine. It's time to remove the years and regain its glamour. Check the methods on how to restore wood patio furniture.

Methods to restore wood patio furniture set:

1) Clean the old finish

It's easy to just wipe up an old, aged stain or paint since it's boring and dull. A new coat, on the other hand, will not hold or stay effectively unless it is put to a clean, flat surface. You can use a chemical remover or a heat gun to remove it instead of painting over the previous finish.

You can use a paintbrush to scrape away any cracking or topcoat. Apply a premium wooden cleaner in a thick layer over the entire surface with a moderate paintbrush in a quick motion. You don't need to apply it like a paint coat. Allow 40 minutes for it to absorb in, then wipe off the old finish with a plastic scraper once the solution has resurfaced.

2) Sand the surface

The more careful you are with the cleaning, the less sanding you will need. Start by sanding any remaining finish and smoothing out any irregularities in the wood with moderate sandpaper. Then you can use moderate sandpaper to smooth up the entire surface. Always sand with the grain of the wood.

3) Stain the surface

Water-based stains are less harmful to the environment and are simple to remove with water and soap. You should never use deck stains on furniture. Let the stain soak into the wood with a cloth or moderate paintbrush. You have to let the artwork dry completely after wiping away any excess stain with a clean towel.

4) Use an effective sealer

If the stain you used didn't come with a sealant, use a wood sealer and guard to seal the fresh finish. Apply using a towel or a small and medium paintbrush in a flat, vertically keeping the brush. As you progress to the next region, connect brushstrokes. You need to allow for complete drying between layers for about 2 hours.

How to restore wood patio furniture must be clear to you now.