How to treat damp walls internally?

If you even spot a damp wall, make sure to treat it as soon as possible. When I faced the same issue, I got in touch with my uncle, who recently got his damp wall fixed and asked him how to treat damp walls internally. He asked me to follow a few steps, which I have mentioned below.  

How to Fix Rising Damp on Internal Walls?

My uncle told me that the key to solving this issue is to act as soon as possible, and after that, he told me about the steps. 

• Start the process by locating the cause of the issue. 

• Next, buy or rent a dehumidifier to dry out the room completely. 

• After that, he asked me to use a stain blocker to prevent any future staining. 

• Following that, I had to replaster the walls. 

• To redecorate, he suggested that I use paint, tiles, or wallpaper. 

This is what my uncle told me when I asked him how to treat damp internal walls. I hope this helps. 

Recently, I started seeing damp patches on the internal walls of my house. I tried removing them by cleaning them with a wet cloth, but after a few days, they came back. Following that, I called my uncle and asked him how to treat rising damp on internal walls. Here is what he told me

How to Treat Dampness in Internal Walls in India?

Uncle told me about a few things that I can do to solve this issue, and those are

Increase the Ventilation

He told me that when it comes to how to treat damp walls internally in India, inadequate ventilation can cause moisture accumulation and condensation indoors. 

To solve this issue, he suggested that I install exhaust fans in laundry rooms, bathrooms, and kitchens to improve airflow and remove the humid air. He also told me that I could use air bricks or trickle vents for cross-ventilation. 

Repair Damaged Surfaces

My uncle told me to restore all moisture-related issues, such as rotting wood, crumbling plaster, etc. 

He said I should either replace or remove the damaged materials to make sure they are dry and seal the area. He also suggested that I use moisture-resistant materials in areas prone to moisture. 

Remove Mold and Mildew

According to my uncle, when it comes to treating rising damp on internal walls the growth of mold and mildew can increase health-related problems. 

He asked me to use a dedicated mold remover or a solution of detergent and water to properly clean the impacted areas. He also suggested that I use protective gear, such as gloves,etc, before cleaning. 

And that’s what he told me about how to treat rising damp on internal walls. I hope this helps. 

To avoid structural damage and maintain a healthy living environment, treatment for damp internal walls is essential. The origin and degree of the dampness will determine the proper course of action. 

How to Deal with Damp Interior Walls?

• Identify the Source:

First, determine the cause of the moisture, whether it is coming from leaks, condensation, increasing dampness, or inadequate ventilation. To select the best course of treatment, this is essential.

• Fix Leaks:

If the moisture is the result of plumbing or roof leaks, have them fixed right once to stop the flow of water.

• Improve Ventilation: 

Increased ventilation is necessary to avoid condensation-related dampness. Make sure that restrooms, kitchens, and other high-moisture areas have enough ventilation.

• Damp-Proofing:

A damp-proof course (DPC) or damp-proof membrane (DPM) might be needed to prevent rising dampness. Usually, this entails injecting a chemical or setting up a physical barrier.

• Dehumidifiers: 

Use dehumidifiers to lower the humidity levels inside, especially in places where condensation is a problem.

• Repaint or Replaster: 

You might need to repaint or replaster the damaged walls with damp-resistant materials after taking care of the underlying problem.

• Mould Removal:

If moisture has led to the growth of mould, clean the area and apply anti-fungal treatments.

•  Improve:

Enhance insulation to avoid cold walls that might cause condensation. This can involve enhancing loft insulation or adding cavity wall insulation.

• Professional Assistance:

Consult a specialist in damp-proofing and structural repairs in extreme circumstances or if you're unclear about the source.

These are a few steps on how to remove damp from internal walls.

The technique used for treatment varies, therefore before beginning, it's critical to determine the primary reason for the dampness. Addressing the problem correctly would not only stop further harm but also preserve a safe and comfortable living space.

Read More:

Having damp walls means trouble in the house. It damages the wall and weakens the walls and at the same time destroys the beauty of the house. Not only does it look visually unappealing but it also invites moulds and fungus in the house which in turn causes asthma and allergies. So, as soon as you identify a damp wall, take measures to treat it immediately. You can check if the walls are damped formed by moisture, rising damps on the ground floor with brown or discoloured marks seen 1 metre above the internal walls, or watermarks found on the masonry when there is rainfall. Since it is dangerous to have damp walls inside home let us learn how to treat damp walls internally.

Simple Ways to treat damp walls internally at home:

• Work upon ventilating your kitchen, bathrooms, etc. Add a fan that will assist in retaining the moisture.

• You can also purchase a condensation mould kit to get rid of moulds from walls. After that, you need to paint the wall to seal the dampness.

• You need to work upon insulating the cold walls and improve upon the heating system of the property at the same time. 

• Avail of a waterproof injection course or a damp proof membrane if required.

This is the process of how to treat damp walls internally. I hope you understand now.

Read more:

Ugh! Damp patches on the walls can be a real pain as not only are they visually unappealing to look at but also they can cause mould too. And mould can affect your health especially if you suffer from allergies and asthma. Moreover, having a cold damp internal wall can also make a room uncomfortable to live in. So, let me how to treat damp walls internally:

I should tell you that dampness on internal walls usually develops due to condensation. Water contained in the air condensers on cold areas, like walls, results in a moist condition ideal for mould spores to live. To prevent dampness on interior walls as well as mould growth caused by condensation, you should adhere to a proper heating regime and ventilation. I recommend you paint ceilings and walls with good-quality mould-resistant paint. It is an efficient and easy solution to treat damp walls caused by condensation.

Damp walls can also develop due to rising damp, which is caused by a non-existent or poor damp-proof course (DPC). So, installing or replacing DPC and membrane can prevent further rising damp. You can also treat and damp-proof internal walls with a damp-proofing cream.

I hope now you know how to remove dampness from wall.