What should be the geyser height from floor?

Hello Samar. The geyser height from floor should be at least 6 to 7 feet. This is needed to maintain enough water pressure. Hot water flow remains proper due to the presence of sufficient water pressure. I recently got a new geyser for my bedroom’s washroom. Before getting it installed, I looked over the installation tips and thus found the apt height. There’s more to proper installation, which I am sharing below.

What to Check While Installing a Geyser?

Here are things to check before you install the geyser:

1. Look for a firm wall to install the geyser.

2. Maintain a minimum height of 6-7 feet from the ground for the best installation.

3. Ensure there’s a proper water connection from the heater.

4. Make sure to keep enough space between the geyser and walls for safe maintenance and inspection.

5. Check that the location where you’re installing the geyser has a proper electrical connection close by.

This is all about the height of geyser from floor. I hope this helps.

A geyser is an electronic appliance so it is better if you keep it as far away as you can from water. In fact, when our electrician came to install it, he also suggested keeping it as high as we can. The height of geyser from floor should be 6 feet or 1.8 metres. This height will ensure you remain safe from electric shock. 

Why is Maintaining Electric Water Heater Height from Floor Necessary?

It is important to maintain the water heater height from floor to prevent any kind of accident. All electricians will say the same thing and might not install it if the height is less than 6 meters. I have learned some more importance of maintaining this height, like

• Proper installation of the heater at the standard height will ensure good performance and efficiency by allowing for better hot water distribution and flow.

• Placing the water heater at this height will simplify maintenance tasks such as temperature adjustments, inspections, and repairs.

• Following recommended installation heights will ensure compliance with safety standards and building codes, promoting a secure and legally compliant setup.

• The electrician also mentioned that raising the water heater can protect it from potential damage caused by flooding or water leakage on the floor.

So for your own safety, it is better you maintain the standard height for installing an electric water heater from the floor.

Read More:

You must know that geysers are a widely used and essential home appliance. When I was buying one for my home, the shopkeeper told me that the correct installation of the geyser is necessary to ensure end-user safety and effective operation. One should follow manufactures guidelines while doing the geyser installation. You must know what should be the geyser height from floor:

According to the experts, you should install the geyser at a height of at least 6 feet or 1.8 metres from the floor. This will ensure that the water pressure is adequate and you’ll get a good hot water flow in your faucet rather than a trickling down of hot water. Now you know what should be the geyser height in bathroom.

I also want you to know that you are required to keep some space between the walls and the apparatus while installing a geyser. If the electrician doesn’t have enough space to check out the parts of the geyser, then he won’t be able to repair it or service it properly.

Plus, your geyser should be easily accessible if you want to get it serviced or repaired. Some people think that they will get better access by placing the geyser right on top of the toilet but this makes it harder for an electrician to reach the apparatus. I recommend you to put it on the wall’s portion that does not have anything below the geyser and is away from damp areas, such as the toilet, bathtub, or shower. This way, anybody can easily access the geyser with the help of a small stool.

I hope you liked these installation tips on geyser height and space.

Read more:

Now you know what should be the ideal geyser height from floor.